Jump to content
SAU Community

Recommended Posts

Advertising item on behalf of a friend so please direct all phone enquirers to JAMES or if you PM me I will assist you to the best of my knowledge and forward your message onto james.

Item:

BRIDE ERGO I Recliner bucket seat

Age:

Unknown

Condition:

Pretty good - slight wear

Price:

$300 neg pickup

PENDING PAYMENT & PICKUP

To Fit: (What car)

Any car

Location:

Melbourne, south eastern suburbs

Contact:

PM or call/SMS 0448843835 - ask for James

Comments:

For sale is a genuine BRIDE ERGO I recliner bucket seat with NO rail.

Its priced for a very quick sale so get in quick!!

The seat is in good condition except for some minor rips due to its use over time. Can be easily repaired and is nothing major. Besides the rips the seat is in mind condition and would make for a perfect upgrade in any car.

Rails can be bought separately to suit.

Seat is universal and can be used as a passenger or drivers side seat dependant on the rail purchased.

If you have any other questions, feel free to ask.

:)

bride1ll2.jpg

bride2cz1.jpg

p1010035vj3.jpg

Edited by abu
Link to comment
https://www.sau.com.au/forums/topic/201702-bride-ergo-i-reclinder/
Share on other sites

damnn to bad your in melbourne, otherwise i would have picked it up. (Gold Coast)

Ah thats a shame.

Unfortunately postage isn’t much of an option due to the size otherwise I could have arranged something for you.

Either way it is a very cheap seat. Anyone who gets it in Melbourne is picking up a bargain!

And remember, price is negotiable :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...