Jump to content
SAU Community

Recommended Posts

  • Replies 110
  • Created
  • Last Reply

Top Posters In This Topic

It feels like a clutch pedal :blink:

Good news. The box is fixed and it wasn't something massive. The circlip and spring came off the end of the shaft and planted themselves elsewhere in the gearbox. The shaft now has a new circlip and a deeper groove machined to sit in to ensure it's not going to wander out again.

I want to say thanks to PAR for all their assistance and quick turnaround in resolving the issue ;)

It may arrive in time to be installed for the weekend, otherwise it should be back on the road early next week.

lol, I won't be there, at least not driving. Had my third drive tonight, it's going to take a very long time for me to perfect driving manual let alone driving it hard. Excuse the fact I've had my license 7 years, I'm pretty much learning to drive all over again.

  • 2 weeks later...

P1010364.jpg

183.3fwkw. Not quite as much as I was expecting but we think a few things are restricting it a little (intake and exhaust), boost drops off to wastegate boost pretty early on. O2 sensor hasn't been sorted yet so it's been tuned without one again until that's sorted. The entire loom section for the O2 sensor has been re-wired so it'll at least work once we get it in. Also split a CV boot on the dyno, messy!

If anyone is interested in reading a little bit of my story I did an interview with car blog Obsessive Compulsive Tuning Cars:

Part 1:

http://obsessivecompulsivetuningcars.com/2...ve-for-her-car/

Part 2 to follow.

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Wow .. I learn't on manual, have only owned manual cars - I don't think I've driven an automatic more than maybe 30 minutes in my driving life. I've taught people to drive manual, but I honestly can't even imagine trying to learn to drive manual after mostly only ever having driven auto... good luck with it :) I think it will only improve your understanding of cars and handling - which I think is what you want to do :)

You're imagining right, it's hard. Especially since the car hasn't been running since the tune and I've got no manual cars to learn it at the moment. It's a very frustrating thing, because I can drive well in an automatic, I can drive fast and have done a fair bit of track work in an automatic and I'd say I was reasonably good at is, but this is like trying to learn to drive all over again after 8 years of having my license. I'll get there eventually but it's going to take me a long time.

Oh...and even with heavy duty clutches its not too different.

I had been on my manual license my about a year when I got the Ceffy with a heavy duty clutch, I stalled 3 times on the day I got it, and once after that reversing up my gravel driveway and that was it...When I jump in mates' cars with heavy clutches I struggle a bit, because the point of engagement is almost always different, as is stiffness, but again, bit of practice and you're all good.

  • 3 weeks later...

Woohoo, I has the Pulsar back. The problems:

  • Throttle was adjusted completely shut. No idea who on earth did that. This was the cause of the car trying to stall/stalling while backing off throttle and the cause of the rough idle.
  • Tune was using the wrong base image file - from an N14. This was causing the overfueling. It now makes 13fwkw more on the same boost - 196.2fwkw, shitloads more torque (617nm according to the dyno lol), the turbo spools much earlier and it makes much more power through the midrange. The hesitation at 4,500rpm is gone. It's quite insane to drive.
  • Hot start enrichment had too much fuel. This was the cause of the car stalling every time it was started warm.

scan0001.jpg

This tune was on 16PSI, previous tune on 17PSI. More power with less boost :(

This will go in down the track when I have an O2 sensor (daughterboard with O2 sensor tune):

tune_board.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone. Is there a way I can get the original window sticker (maroney label) for my 1995 R33 GTST? I doubt I’ll be able to ever get it but it’s worth a shot to ask
    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
×
×
  • Create New...