Jump to content
SAU Community

Recommended Posts

I had my avcr installed last week and since then have only had problems with my car.

it was running perfectly beforehand and never skipped a beat. the car has an ARC fmic, 3" exhaust, pod..the usual basics.

the car used too boost to 10psi with the full exhaust on and never had any troubles..was nice & quick.

now for the problems,

the boost was set on 10psi through the avcr because when they tried 2 go any higher it would start missing..was told to change the spark plugs.

whenever the car is pushed past 4k the boost would spike to 11psi and start missing.

when I filled up with fuel I worked out I lost approx 100kms of driving with the amount of fuel used. I instantly thought its hitting R&R.

so I have set the avcr to allow the actuator to control the boost until I get it fixed up. it stopped missing high in the rev range but now its started missing on idle.

opinions on what the problem/s is/are? plugs,coil packs, R&R??

also the avcr should be able to hold 10psi without spiking to 11psi right?

Edited by so_tred
Link to comment
https://www.sau.com.au/forums/topic/202890-r34-missing-running-rich/
Share on other sites

are u still running the std ecu?

honestly a could tune would fix it all up.

anythign u change to the car, uve changed how the car runs.

get it to a tuner, although it would be a big waste if ur planning more mods in the near future, slap everythign on 1st then get a tune.

yeah,I've got an safc ii installed and a sitc ready to go.

I als forgot to mention..the car isn't running rich with the boost on only 6psi but its missing on idle.

just looking for some ideas..I get what ur saying about getting it all tuned and then see

Take it back to the place where you had the AVCR fitted and get them to re-check their work, if it was running with no dramas before hand it has to be something to do with how they fitted it mainly the connections to your standard ecu, i have not had a huge amount to do with the avcr but i know it connects to the injector signal from the ecu (could be causing dramas) i also know that bad or bridged earths between ecu's and piggybacks can cause various issues.

  • 3 weeks later...
yeah,I've got an safc ii installed and a sitc ready to go.

I als forgot to mention..the car isn't running rich with the boost on only 6psi but its missing on idle.

just looking for some ideas..I get what ur saying about getting it all tuned and then see

Hey samantha,

I just wanted to know if you had the same problem as me. I got similar mods to you cooler and 10psi boost on my auto r34, and i recently noticed its a bit more lumpy wen its idling, maybe missing? I was wondering if you had any ideas wat it could be?

Also i wanted to ask ya if you moved your auto box cooler? im thinking of getting a bigger one and putting it in the same spot?

Thanks if you can help :(

Adrian

But i dont think the car is running rich as now that its running 10-11psi, it seems to be getting more km's per tank. does that seem normal for rb25's?

It seems to be idleing rough alot more after a spirited drive than after normal driving? Plugs and oil change have been done a few weeks ago..

Any ideas?

check your plugs and get back to us. what do they look like? is it possible to upload a pic?

also what kind of plugs are u using, and are they gapped correctly??

i had same problem, all it took was a simple regap. :(

check your plugs and get back to us. what do they look like? is it possible to upload a pic?

also what kind of plugs are u using, and are they gapped correctly??

i had same problem, all it took was a simple regap. :D

Yea currently im running the BCPR7ES at standard gap, recommended by the tuner, but theyre only about 700Km~ old

Im not 100% but could it be maybe the timming belt on its way? the car is ~65 XXXkm showing on the odo, and not sure if its been replaced..

:/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...