Jump to content
SAU Community

Recommended Posts

Well unfortunatey I hit a roo this morning and damaged the LHF guard, smashed the light and some other bits incl the front radiator carbon fibre support. 60kmh 50 yards from holiday home....just jumped from a high block beside us in to my left headlamp.

Killed the eastern grey kangaroo unfortunately.

All the lining under the guard is damaged as well as the left parts of the rad support that supports the light assy. I think that will be a full replacement as not sure they can repair them.

Drove 300km home ok after the Racv guy used a crow bar to clear the wheel. No issues at 110kph so I am figuring all is well mechanically.

I am insured but I was wondering about parts and good repairers in Melbourne...

1. Can infinity headlights be adjusted for RHD.

2. Where can I point repairers for parts other than Nissan au....who say they do list the parts but have to import them.

3. Any good repairers in Melbourne who know these cars.

I am concerned more about availability of parts and quality of repair.

Sad day.

Gibbo

Link to comment
https://www.sau.com.au/forums/topic/203134-ding-a-roo/
Share on other sites

She still drives great and 100k so there is nothing mechanical and still gets 9l/100km at that. They are awsome cars to drive.

It was just one of those things the roo just jumped right into my left hand HID headlight. Left it's fur in there and buggered the globe as well.

Had I not just been 50 m from my other home but on the open road it could have been much much worse and the car would have probably been totaled. Fortunately the air bags did not go off.

Regardless of opinions I am going to invest in an ultrasonic shu roo device as I have one on the 4wd and never hit a roo ...I figure that would have may be been the only thing that could help. Second roo I have collected the other one at 90kmh and that one flattened itself across the entire front bumper of my SS with almost no damage to the car.

So glad it was not a person but sad for the roo as it had a very young joey in the pouch... and I am one of those folks not that happy about culling.

Thanks for your thoughts.

***** Hey ...Can the USA headlights be used for Right hand drive cars (I'd doubt it). $600usd in USA $5000au via Nissan go figure.

Link to comment
https://www.sau.com.au/forums/topic/203134-ding-a-roo/#findComment-3605491
Share on other sites

I wish they were and would like tom find out for sure first.

As Chris says the lights have a 15 degree offset to the passenger side in each country so that would mean the US ones would need to be ale to be adjusted 30 degres to the left. If they can then sweet it opens up a huge cheap market for us - $400 ea (plus shipping) rather than the $2500 each Nissan charge.

Can anyone confirm if this is possible please?

Gibbo

Link to comment
https://www.sau.com.au/forums/topic/203134-ding-a-roo/#findComment-3605570
Share on other sites

Hi I was in the process of getting lights from the US, and Chris is correct (is the guy ever wrong) about the 15 degree adjustment, so there is not enough adjustment on the US lights to stop them from pointing towards on coming traffic. The place that complianced my car confirmed this as well. Frank bought the 2006 lights on his car. He can probably provide a more detailed account of the upgrade.

cheers

Edited by vspec2
Link to comment
https://www.sau.com.au/forums/topic/203134-ding-a-roo/#findComment-3605866
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...