Jump to content
SAU Community

Recommended Posts

Hey guys,

My driveway has a bitch of a curb. My car looks like a 4WD at the moment, and it still only has a few cm of clearance when I'm pulling in. Add an aftermarket bodykit and lowered suspension, and I'll have to park on the street, something I really want to avoid.

I've talked to a Suspension speciallist, and they told me that airbags will not fit on the skyline because there is not enough room up the front. My question is, what else can I use to raise the height of my car while still retaining a car that handles as if it was on rails?

Thanks,

Rhys

Link to comment
https://www.sau.com.au/forums/topic/203347-automatic-height-adjustment/
Share on other sites

I know how you feel mate. My driveway would have to be the worst for a car enthusiast. I live on a main road and there wouldn't be any chance of using ramps.

Just adapt to your drive way. My car's pretty low, but I can still manage to get out. Just experiment with the ways you can go out of your drive way. At the moment, I'm reversing out at the maximum angle my drive way will let me and making my rear wheel go over the curb so that it clears the lowest section of the road/driveway. Doesn't make any sense. hahaha. You'll understand when you see it though. I'll try and get a picture up of how I get out of my driveway.

Kinda makes sense adam. I was always going to go out on an angle, cos its a wide street and very quiet, take up as much of the road as i need. A picture would be really helpful if u've got one. Now I just have to afford the coilovers...

Here are some pictures of my driveway. As you'll see, its bloody stupid, but I can still manage to get out okay. There's also a picture of how low my car is. Only sometimes would it scratch the fuel tank.

Is your driveway as bad as mine?

post-32186-1201517899_thumb.jpg post-32186-1201517917_thumb.jpg post-32186-1201517959_thumb.jpg

I use the curb to get my car over the lowest part of my way out.

Here's how low my car is..

post-32186-1201518100_thumb.jpg

Yeh, that is very bad!! Mine isn't a square like that, but it is still steep. More like a crazy triangle. and it's the same all along my side of the street, but the otherside is fine. Kinda weird, here is a photo of it. It looks decieving, but that may be because I am so used to it, only curb I've had!

YAY!! There you go. It doesn't look like much, but it will definately scrape when lowered with a body kit. So, I could come out sidewards, that might help a bit. Or park on the street, but I don't want that!! I won't even park in the private carpark at work, someone might scratch it!! I park out the back now, next to a written off VL Commodore. Makes my car look so much better!

I would swap drive ways any day of the week! The lowest you can go legally is 100mm from the floor, but sometimes, people go to about 80mm ground clearance. I reckon you can get up that pretty easy. Just go up/down at a really sharp angle. So much that it looks like you're parallel parking. haha. No really, your driveway isn't that bad. Take up as much room as you can by driving on an angle.

Once your two front wheels get on the driveway, you should be able to straighten up and it should be fine.

Front is normally much lower than the back so get someone else out there with you and practice the angle. Take it really gentle until you have one front wheel and one rear wheel up on it. My driveway looks much steeper than that, I take 3-4 turns and drive up the nature strip to make it in :laugh:.

Someone has made it in once without scraping it with 1 or 2 turns, I've never been able to repeat it without scratching my front bar.

And I'm 11.5 or 12.5cm off the ground (roughly) on the front bar and you have to use angle at some petrol stations to get in.

If you go below 10cm at any point its a defect so I'd be careful, that and you will have so much trouble at some peterol stations and other places that you will fear all driveways/speedhumps :D

Personally I reverse in but I think your driveway might be easier going forwards.

yeh, i reverse in as well. But I can drive up onto the neighbours verge and reverse in. My aim is about 100mm (or 10mm :-)!!) at the kit. I'll try practising my angles, and my verge and my neighbours verge are all paved, so I can take up as much room as I could. I hate speed bumps as it is, and try to avoid them as much as possible. Just have to avoid places like Hillaries, where you can't go around the bumps. I'd prefer to have some sort of height adjustment, but oh well, you get that!

lol get hydrolic suspension ahhahahahahhahha and bounce away like a pimp :D:P or just get a quote from a concreter to redo your drive just how you want it prolly cheaper than hydrolic and air bag suspension LOLZ

OMG you guys are pussys, Try driving up an mountain to get to ur garage.. No bullshit my drive way it about a 45 degree angle.

Tein once made adjustable height coilovers adjustable in car which raise and lower on a button, $4,000 tho.. Thats what I need, your just crying about nothing

Edited by DECIM8

Yeah, from what I've seen my driveway's pretty bad, but I still manage to get up fine. Sometimes it would scratch, but with practice, it all works out. The worst part about my driveway isn't the driveway itself, but the road, gutter then driveway... if you know what I mean. It goes into a little 'ditch' which it scratches everything. That's why I use the curb to get around that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...