Jump to content
SAU Community

Recommended Posts

I had this posted in the QLD / Events section but after spending more time here in the motorsport section I think it might be a more appropriate place to post it. Round 1 is only just over a week away on Tuesday Feb 5.

I have also added Motorkhana to the event and it will be run all day in the carpark between the pit bays and the sheds. For those who remember my big electronic sign and timing beams I have converted that system to do Motorkana so the crowd can see the elapsed time live.

Time Attack Series 2008

Event:

There will be a 6 round series, requiring each driver to complete 3 Sprint Track Rounds and 3 Clubman Track Rounds.

There will be 4 half track days for each of the clubman and sprint tracks that will be eligible for points.

The best 3 of the 4 of these half days completed by a driver will count as point’s rounds for that driver (A driver can miss a round on each track and still be competitive).

(The series is points based; therefore all drivers are welcome to any event as always)

The winners of each class, and the place holders, will be presented trophies at the end of the year.

Class Structure:

A: Street Class

B: Open Class

Division 1 (A, B): AWD - Battles of GT-R vers EVO vers WRX vers GT-4 etc

Division 2 (A, B): Forced Induction - Battles of 4/6/8 Cly 2WD Turbos, Rotaries, Skylines, BA's etc

Division 3 (A, B): V8 Naturally Aspirated - Classic Ford vers Holden with some Toyota power

Division 4 (A, B): Naturally Aspirated ( but not V-8 ) - All 4 and 6 cylinder cars including Rotaries

General Rules:

Nitrous prohibited.

Roll Cage Permitted in all classes.

The same driver must drive the same vehicle for the duration of the series. The combination of vehicle and driver shall collect points.

Modifications must not be made which reclassify the vehicle during the series. Points are not transferable between classes.

A: Street Class:

The Vehicle must be constructed by a major manufacture.

Must have a rear exiting exhaust system with a muffler.

Must be road registered.

Must have OEM glass.

Must have OEM doors.

Must have both front seats (can have a race seat and a standard seat) and basic interior in the front half of the cabin. (Removal of carpet, stereo etc and liner allowed but not the dash)

Must not have in cabin adjustable brake bias / pedal box.

Must have DOT approved street legal tyres. Tyres must not have “For race use only” or “Not for highway use” marked on them. The tyres cannot be grooved slicks etc (See tyre register thread for further details)

B: Open Class:

All cars that do not fit into the Street Class and comply with the general rules.

Points Allocation:

1st = 12 points

2nd = 10 points

3rd = 9 points

4th = 8 points

5th = 7 points

6th = 6 points

7th = 5 points

8th = 4 points

9th = 2 points

10th = 1 point

A minimum of 5 laps must be completed at a round to be eligible for points.

Tyre Register:

For the street class tyres must be grooved and some wet weather capability. Slicks are allowed in race class.

There is a tyre register so there is no confusion as to what category a tyre belongs.

Click this link -> http://www.timeattack.com.au/forum/viewtopic.php?t=139

If you have a tyre that is marginal please contact [email protected] for a ruling. Otherwise you may be reclassified on the day.

Rulings:

The organisers decision shall be final. No dispute shall be entered.

First Event: February 5

Want to Get Involved, fill out the Join Form at:

http://www.timeattack.com.au/mailing.php

And I will email you out all the details.

Link to comment
https://www.sau.com.au/forums/topic/203420-qld-time-attack-series-2008/
Share on other sites

Yes all rounds are on weekdays, the calendar has been updated on the website for the year: 2008 Series Calendar

If you think you can make it to a round sometime during the year let me know in advance so I can secure you a spot.

Also, anyone who has run with us in the last few events, the Hall Of Fame and the Top Ten have now also been updated.

Paul

Ryan its Qld Raceway. Currenty the only track we run at until Lakeside becomes available.

Paul

Hey Paul, Top 10 2WD Sprint track, you've got the fastest time in 2nd position and Georges initials are GK not GC :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...