Jump to content
SAU Community

Recommended Posts

How about something like drifteks and some 265's?

Get the 17x9.5. They come in 18's now though (which sucks cause i need a set to clear my brakes and i bought 17's just before they released the 18's)

i it 355 6-pot alcons under 17x9.5 uras NS-01's (discontinued) quite often... in fact we just fitted them to a 10sec GTR a month ago. Surely the driftek copies are identicle?

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3608463
Share on other sites

Well that was my original plan, 355's with alcons, but now ill be able to run up to a 380mm disc :ermm:

Ive got them on the car now with the standard brakes (and dba rotors etc) and i still have the alcon option open, but a new option is open to me and id be an idiot to not take it, thing is ill need at least 430mm inside diameter or they wont fit, so it looks like 18's are the go. (im planning on going to see the car tommorrow and measuring the 17's up just to be sure, but im pretty confident they wont fit, ive seen 355's under 17" and its pretty tight)

Yeah id assume the URAS and drifteks are the same, there's also another brand that does them

Does URAS make an 18' NS01?

post-23559-1201530389_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3608496
Share on other sites

Does URAS make an 18' NS01?

Nah once the copies flooded they market they discontinued them sorry. i just scored GPSPORTS distribution right for AUS so if you like the gullflames i can help there.

http://www.gpsports.co.jp/whe/whe.html

pic01.jpg

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3613502
Share on other sites

Nah once the copies flooded they market they discontinued them sorry. i just scored GPSPORTS distribution right for AUS so if you like the gullflames i can help there.

http://www.gpsports.co.jp/whe/whe.html

pic01.jpg

Cheers i might take you up on that :D

When are you bringing the first load in? It would be good if someone could trial fit them over some big brakes :worship:

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3614217
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Finally have an update on this  Rack came in this week so I did a test fit. You do need the S chassis bushings since the rack is 5mm thinner than the R33 rack. The main issue I foresaw and ran into was one of the hardlines not lining up properly with there it's meant to on the rack. After some gentle coercing and bending very slightly, I managed to get it to fit without any kinks and keeping the hardline pretty much in all of the factory mounting positions. I did have to unbolt all of the soft mounts to move the line around so I could snake it out and bend it safely but it looks good to me for now. I'll update when the rack is fully bolted in and functioning.  
    • I hear this thread needs an update following its adventures last Wednesday!
    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
×
×
  • Create New...