Jump to content
SAU Community

Recommended Posts

How about something like drifteks and some 265's?

Get the 17x9.5. They come in 18's now though (which sucks cause i need a set to clear my brakes and i bought 17's just before they released the 18's)

i it 355 6-pot alcons under 17x9.5 uras NS-01's (discontinued) quite often... in fact we just fitted them to a 10sec GTR a month ago. Surely the driftek copies are identicle?

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3608463
Share on other sites

Well that was my original plan, 355's with alcons, but now ill be able to run up to a 380mm disc :ermm:

Ive got them on the car now with the standard brakes (and dba rotors etc) and i still have the alcon option open, but a new option is open to me and id be an idiot to not take it, thing is ill need at least 430mm inside diameter or they wont fit, so it looks like 18's are the go. (im planning on going to see the car tommorrow and measuring the 17's up just to be sure, but im pretty confident they wont fit, ive seen 355's under 17" and its pretty tight)

Yeah id assume the URAS and drifteks are the same, there's also another brand that does them

Does URAS make an 18' NS01?

post-23559-1201530389_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3608496
Share on other sites

Does URAS make an 18' NS01?

Nah once the copies flooded they market they discontinued them sorry. i just scored GPSPORTS distribution right for AUS so if you like the gullflames i can help there.

http://www.gpsports.co.jp/whe/whe.html

pic01.jpg

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3613502
Share on other sites

Nah once the copies flooded they market they discontinued them sorry. i just scored GPSPORTS distribution right for AUS so if you like the gullflames i can help there.

http://www.gpsports.co.jp/whe/whe.html

pic01.jpg

Cheers i might take you up on that :D

When are you bringing the first load in? It would be good if someone could trial fit them over some big brakes :worship:

Link to comment
https://www.sau.com.au/forums/topic/203827-n1gtr-drifteks/#findComment-3614217
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...