Jump to content
SAU Community

Recommended Posts

got a 33gtr with exhaust, arc cooler, pods and a evc 4 just put in. and running just under 1 bar.

was having a few issues with the boost dropping off before but now the evc is installed the boost doesnt drop off. the car will be running sweet but than it will just feel all sluggish and not go like it usually does. notice a big power loss

i've searched and read something about rich and retard and wondering if this would apply to the gtr also. cant think of anything else, just thinking this might be my problem.

any help would be great, thanks

Link to comment
https://www.sau.com.au/forums/topic/204222-33-gtr-running-weird/
Share on other sites

got a 33gtr with exhaust, arc cooler, pods and a evc 4 just put in. and running just under 1 bar.

was having a few issues with the boost dropping off before but now the evc is installed the boost doesnt drop off. the car will be running sweet but than it will just feel all sluggish and not go like it usually does. notice a big power loss

i've searched and read something about rich and retard and wondering if this would apply to the gtr also. cant think of anything else, just thinking this might be my problem.

any help would be great, thanks

If its running rich check all pipes for a boost leak.

If its running lean check all hoses for vacuum leak.

before it was cutting boost and running a bit sluggish but thought it was just a problem with the factory boost control. had restrictor removed on the standard boost control also.

so i replaced it with a ebc and now its boosting properly. ran new lines for everything so its setup properly.

the car will be whilest running low boost(.7bar) and than after a while it feels like it will detune, but still running same boost now i changed to a hks evc.

but happens almost staight away if running a higher boost(aprox bout .9 - 1 bar)

the plugs looked good when i got the car compression tested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...