Jump to content
SAU Community

Rb20 Looms, Rb25 Cam, Tyres, Chip, Cradle Bushes, Ignitor, Std Inlet Manifold, Throttle Body, Hub Mounts

Clint32
 Share

Recommended Posts

Clint32 Mentor

Clint32

Posted
Posted (edited)

Cleaning out the garage and found a few parts no longer required

Rear cradle bushes, whiteline set of 6 suit most nissans, used for a few months only before replaced with alloy ones, new $120 sell $40

Rb20 throttle body with TPS, $30

Rb25 starter loom, $15

R32 GTR rear hub mounts, alloy, exc condition, $40

RB20DET ignitor pack, $25

RB25DET inlet camshaft, R33 model, excelent condition $50

RB20DET inlet manifold- bottom half - perfect for a custom fab plenum on to be built on $30

2 x Dunlop 225/50/6 SPsport 9000 tyres, new new min 7mm tread, cost around $300 each new, $100 each

Dr Drift tuned chip to suit rb20 with 550 cc injectors, z32 afm and to4 size turbo, ran ok on my setup but this will change for each individual car, $20

All parts in good working order when removed, in Adelaide but will ship at buyers expense

Edited by Clint32
Clint32 Mentor

Clint32

Posted
  • Author
Posted

sorry i cant answer that for sure, do a search on here and you should find an answer

will the igniter work on a series 1 r33 rb25det if so sold to me
NSA11N Proficient

NSA11N

Posted
Posted

can you please tell me how much including frieght to postcode: 2228 in Sydney

i will take it

Clint32 Mentor

Clint32

Posted
  • Author
Posted

I have someone elso who wonts to buy the loom with that plug attached, so at this stage im waiting to hear back from him, failing that i would only sell the loom complete

hey iam after the o2 sensor but i need both ends off the plug awell if thats ok

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • GTSBoy
      My BMW 335i

      By GTSBoy · Posted

      Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • Duncan
      R33 Fuel Pump & Brakes after alarm swap

      By Duncan · Posted

      I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...