Jump to content
SAU Community

Recommended Posts

Hey all,

I need advice on what could be wrong with my car. I'm a new skyline owner and only had the car since Tuesday. Ok so heres the problem. When I'm driving and I come to a stop at an intersection etc the revs drop right off to like 200rpm. Engine recovers and it settles at around 500 - 600rpm. Is this the correct idle? I thought it might be a little higher but I'm not sure.

The car has also stalled a couple of times when parking or pulling into the garage. I have checked all the hoses. Found 1 hose with a crack that has been replaced. Any ideas?

Should the boost gauge read 0 because at the moment it reads -20 vacuum. Its an aftermarket boost gauge aswell.

Thanks in advance

Coxy

Link to comment
https://www.sau.com.au/forums/topic/205016-r33-idle-issues-stalling/
Share on other sites

Should the boost gauge read 0 because at the moment it reads -20 vacuum. Its an aftermarket boost gauge aswell.

about -20 at idle is correct

i'll let the others get you for the atmo BOV - dont fight it :no:

if the engine is stuffed it probably will - the expanded pistons seal and create more vacuum.

Its a possibility

possible yes,

but would still have a max of about -20 changing from perhaps -10 or so

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...