Hks Gt3037 - Install Question!

[SLYDA]

I dont want to break anything and want to know how to rotate the bit with the oil lines and water lines so that the drain like is facing to the bottom?? i loosed off the bolts but only the exhaust housing would turn.. ?? also theres some studs that u screw in for the dump 2 exhaust housing, does anyone know if u should screw the short end into the exhaust housing or the long end of the stud? thanks

Edited February 10, 2008 by SLYDA

[nizmo_freek]

I dont want to break anything and want to know how to rotate the bit with the oil lines and water lines so that the drain like is facing to the bottom?? i loosed off the bolts but only the exhaust housing would turn.. ?? also theres some studs that u screw in for the dump 2 exhaust housing, does anyone know if u should screw the short end into the exhaust housing or the long end of the stud? thanks

The short end of the studs goes into the rear of the turbo, the exhaust housing should rotate easily once you have loosend the bolt off, same with the compressor housing.

[The Mafia]

don't make the water lines perfectly straight through though, make sure they are on a bit of a slope to prevent air pockets.