Jump to content
SAU Community

Recommended Posts

Item: Garrett GT3540

Age: 7 months old

Condition: near new condition

Price: will sell turbo separate for $1650

To Fit: any car using T3 flange

Location: Brisbane

Contact: PM or Post here

Comments: Basically brand new Garrett GT3540 also known as a GT35R or GT3582R. This turbo has only been used on a R32 GTST with a full rebuilt RB22. Turbo has done 3000kms on this engine with 2700kms used for running in the engine. Turbo has done 3 power runs with a leaking exhaust manifold and made 386 RWHP. I am selling due to upgrading to a TO4Z.

Turbo specs: *700Hp compressor housing: A/R- 0.70a/r

*Turbine housing: A/R- 0.63a/r

*T3 Flange standard 4 bolt

*Turbine outlet: 3inch

*Oil inlet- inverted flare 7/16-24 thread

*Oil drain- standard 2-bolt T3 flange

*Dual Ball Bearing

*Water cooled center

*External wastegate type

Turbo has smaller 0.63 exhaust housing for better response, on the RB22 this turbo hit full boost at around 3000RPM.

Turbo must sell ASAP, in perfect condition.

If you are looking for a good 380-400RWHP (with added supporting mods) then this turbo is for you.

post-43077-1202697495_thumb.jpg post-43077-1202697513_thumb.jpg

post-43077-1202697531_thumb.jpg post-43077-1202697551_thumb.jpg

post-43077-1202697568_thumb.jpg

ALSO UP FOR SALE IS THE FOLLOWING: (WOULD PREFER TO SELL AS A WHOLE PACKAGE BUT WILLING TO SEPERATE TURBO)

*STAINLESS STEEL HIGHMOUNT EXHAUST MANIFOLD (there is a badge welded on it which says....JAPMODS SS321)

-manifold has a T3 flange

-unsure of age as i brought it secondhand off a friend.

-manifold is in average condition....has been previously polished howerver needs repolished on the underside.

-will fit RB20/25 as they have same exhaust manifolds.

-if it comes down to it i will sell this seperate for $350

post-43077-1202698729_thumb.jpg post-43077-1202698746_thumb.jpg

*TURBONETICS EVOLUTION 38MM EXTERNAL WASTEGATE

-unsure of age as i brought it secondhand off a friend

-has a stainless steel screemer pipe not bolted on but i will include it

-is in good condition and in perfect working order

-will fit any external wastegate type exhaust manifold/turbo setup

-if it comes down to it i will sell seperate for $350

post-43077-1202699080_thumb.jpg post-43077-1202699102_thumb.jpg post-43077-1202699122_thumb.jpg

*TOMEI 1.2MM METAL HEAD GASKIT

-never used/brand new

-excellent condition

-will fit only RB20DET

-good for anyone wanting a safer and stronger engine with slightly lower compression for higher boost applications

-if nobody wants this included in the package i will sell alone for $310

post-43077-1202699516_thumb.jpg post-43077-1202699549_thumb.jpg

ALL PARTS ARE LOCATED IN BRISBANE

Would prefer local buyers within southeast Queensland however can arrange shipping at buyers expense.

Reason for selling is because i have changed my plans and i am trying to fund a trip to the motherland (Japan)

I was going to add these parts to my cefiro but have since decided that it can wait as i have other committments.

WILL SELL THE WHOLE PACKAGE FOR $2500

PM or add post here to contact me.

post-43077-1202700416_thumb.jpg post-43077-1202700389_thumb.jpg post-43077-1202700370_thumb.jpg

post-43077-1202700338_thumb.jpg post-43077-1202700309_thumb.jpg post-43077-1202700289_thumb.jpg

post-43077-1202700272_thumb.jpg post-43077-1202700253_thumb.jpg

Edited by cefilo

the kind of info that is now there! When I had a look there was only the heading that said GT3540 which is what im looking for but with a 1.06 exhaust housing

Good luck with sale mate

  • 2 weeks later...
  • 3 months later...

PRICE DROP read below

Item: Garrett GT3540

Age: 7 months old

Condition: near new condition

Price: will sell turbo separate for $1650

To Fit: any car using T3 flange

Location: Brisbane

Contact: PM or Post here

Comments: Basically brand new Garrett GT3540 also known as a GT35R or GT3582R. This turbo has only been used on a R32 GTST with a full rebuilt RB22. Turbo has done 3000kms on this engine with 2700kms used for running in the engine. Turbo has done 3 power runs with a leaking exhaust manifold and made 386 RWHP. I am selling due to upgrading to a TO4Z.

Turbo specs: *700Hp compressor housing: A/R- 0.70a/r

*Turbine housing: A/R- 0.63a/r

*T3 Flange standard 4 bolt

*Turbine outlet: 3inch

*Oil inlet- inverted flare 7/16-24 thread

*Oil drain- standard 2-bolt T3 flange

*Dual Ball Bearing

*Water cooled center

*External wastegate type

Turbo has smaller 0.63 exhaust housing for better response, on the RB22 this turbo hit full boost at around 3000RPM.

Turbo must sell ASAP, in perfect condition.

If you are looking for a good 380-400RWHP (with added supporting mods) then this turbo is for you.

post-43077-1202697495_thumb.jpg post-43077-1202697513_thumb.jpg

post-43077-1202697531_thumb.jpg post-43077-1202697551_thumb.jpg

post-43077-1202697568_thumb.jpg

ALSO UP FOR SALE IS THE FOLLOWING: (WOULD PREFER TO SELL AS A WHOLE PACKAGE BUT WILLING TO SEPERATE TURBO)

*STAINLESS STEEL HIGHMOUNT EXHAUST MANIFOLD (there is a badge welded on it which says....JAPMODS SS321)

-manifold has a T3 flange

-unsure of age as i brought it secondhand off a friend.

-manifold is in average condition....has been previously polished howerver needs repolished on the underside.

-will fit RB20/25 as they have same exhaust manifolds.

-if it comes down to it i will sell this seperate for $350

post-43077-1202698729_thumb.jpg post-43077-1202698746_thumb.jpg

*TURBONETICS EVOLUTION 38MM EXTERNAL WASTEGATE

-unsure of age as i brought it secondhand off a friend

-has a stainless steel screemer pipe not bolted on but i will include it

-is in good condition and in perfect working order

-will fit any external wastegate type exhaust manifold/turbo setup

-if it comes down to it i will sell seperate for $350

post-43077-1202699080_thumb.jpg post-43077-1202699102_thumb.jpg post-43077-1202699122_thumb.jpg

*TOMEI 1.2MM METAL HEAD GASKIT

-never used/brand new

-excellent condition

-will fit only RB20DET

-good for anyone wanting a safer and stronger engine with slightly lower compression for higher boost applications

-if nobody wants this included in the package i will sell alone for $310

post-43077-1202699516_thumb.jpg post-43077-1202699549_thumb.jpg

ALL PARTS ARE LOCATED IN BRISBANE

Would prefer local buyers within southeast Queensland however can arrange shipping at buyers expense.

Reason for selling is because i have changed my plans and i am trying to fund a trip to the motherland (Japan)

I was going to add these parts to my cefiro but have since decided that it can wait as i have other committments.

WILL SELL THE WHOLE PACKAGE FOR $2500

PM or add post here to contact me.

post-43077-1202700416_thumb.jpg post-43077-1202700389_thumb.jpg post-43077-1202700370_thumb.jpg

post-43077-1202700338_thumb.jpg post-43077-1202700309_thumb.jpg post-43077-1202700289_thumb.jpg

post-43077-1202700272_thumb.jpg post-43077-1202700253_thumb.jpg

PRICE DROP

i have just returned from a holiday and these parts must go.

All parts are in the same condition as posted above, they have just been sitting around in my garage awaiting a new home.

PRICES ARE:

GT3540:$1300

SS highmount manifold:$270

TURBONETICS wastegate+screemer pipe:$290

TOMEI metal head gaskit:$200

Package can be brought for $2000 ...includes all of the above

Edited by cefilo
  • 4 weeks later...

hey mate,

still got this for sale?

what would the turbo go like on a rb20det? ive only got apexi poddy and 3" exhaust off downpipe at the moment. but i was looking at buy wastegate, manifold, turbo, injectors, fuel pump, front mount intercooler and ECU at the same time and fitting them all at the same time so i'd buy the FMIC, fuel pump nd injectors and fit them all at once. would this be a good setup or do you think the turbo would be to laggy?

cheers

Edited by GTS4onP
  • 2 weeks later...
  • 4 weeks later...

Im pretty keen on the mani/gate/screamer... how much delivered to adelaide 5031?

Any idea what spring is in the gate?

May also be keen on the head gasket too.....

Cheers

Ben

Edited by R31 drift pig
  • 2 months later...

Sorry to all who have PM'd me and posted here. I have been overseas and unable to reply to anyone until now, i have just arrived back in Brisbane and still have all these parts up for grabs.

I have replied to all PM's that i have recieved.

Prices are as stated above, for local buyers inpection is more than welcome

Thanks for the interest and sorry i couldnt reply earlier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...