Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: R33 skyline 1996 series 2

Milage: 98,000

Transmission: Auto

Colour: Gun metal grey

Location: Frankston south

Complied? Fully complied and registered with RWC

RWC supplied? Yes

Currently registered? Yes 12months rego comes with vehicle

Price: 12,000 ono

Contact: 0447542543

Comments / Modifications: Engine is totally stock has cat back exhaust and is running a RSM,front swaybar, this car is very well looked after

and is in good condition especially for its age, lowered with whiteline springs in the rear and kings in the front comes with

17x8inch rear deep dish wheels and 17x7inch fronts with semi new tyres, this car goes very quick compared to most other autos i have driven

and very economical 490-510kms out of a tank of petrol, always serviced every 5000kms with good oils and filters. First owner when imported from

japan.

Must sell throw me a reasonable offer and i will consider it. call or sms to arrange a inspection.

Images: picks sorry will be up soon...

Link to comment
https://www.sau.com.au/forums/topic/205765-fs-r33-series-ii-96/
Share on other sites

pics should be up this weekend aslo got told after a few people came for inspection in the last day this car also has a apexi panel filter and a japanese cat back exhaust but is not loud at all very clean smooth note.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...