Jump to content
SAU Community

Recommended Posts

ive got ca18det injectors with the ballast resistor and a z32 afm and a r33 turbo with bosch 040 fuel pump....will my apexi safely support these mod's??

please speak from experience!!!

Edited by allthewaytotheskyline
does any1 know???

what size are ca18det injectors. with a safc you dont want to have to take out too much fuel otherwise it indirectly stuffs with your timing. and yes, a safc will support a z32 afm. you just set it up so the safc knows its getting a signal from a z32 and sending it to a r32 gtst ecu.

what size are ca18det injectors. with a safc you dont want to have to take out too much fuel otherwise it indirectly stuffs with your timing. and yes, a safc will support a z32 afm. you just set it up so the safc knows its getting a signal from a z32 and sending it to a r32 gtst ecu.

the injectors are 370cc...enough for 200rwkw???

the injectors are 370cc...enough for 200rwkw???

i thought stock R33 GTST injectors were 370cc? and my power FC reported 100% injector duty off 14PSI boost, stock turbo, intercooler etc.. with the base FC map.. so i doubt they will support up to 200RWKW.

safc will run the 370cc injectors, it will run the Z32 afm, it will run a fuel pressure regulator and a 040 fuel pump, it'll even run with a highflow turbo. speaking from experience. daily driver. 190rwkw. upgradding to PowerFc as soon as I book it in.

a sitc would help for the ignition timing adjustments.... BUT if you have a R32 Id personally get a remap (contact username: Yoshi) and still use the safc for minor corrections.

wats a sitc??? and how do i get incontact with yoshi??? is he located in sydney??

also how come your upgrading to a power fc if your apexi safc is doing a "good" job?? or isnt it!

wats a sitc??? and how do i get incontact with yoshi??? is he located in sydney??

also how come your upgrading to a power fc if your apexi safc is doing a "good" job?? or isnt it!

sitc is an apexi Super ignition Timing Controller

adjusts the ignition timing, like the safc adjusts the air;fuel ratio

google is your friend

Ive been using safc/sitc for 2yrs. thought its time to "trial" a PowerFc with my auto box

fact is a full aftermarket ecu will always be a better choice than a piggyback.

Yoshi does remaps, have no idea where he is. pm him.

yes - my safc has done an awesome job. just noticed tho that you are talking about a SAFC1. bugger that, get the SAFCII or the SAFC Neo.

sitc is an apexi Super ignition Timing Controller

adjusts the ignition timing, like the safc adjusts the air;fuel ratio

google is your friend

Ive been using safc/sitc for 2yrs. thought its time to "trial" a PowerFc with my auto box

fact is a full aftermarket ecu will always be a better choice than a piggyback.

Yoshi does remaps, have no idea where he is. pm him.

yes - my safc has done an awesome job. just noticed tho that you are talking about a SAFC1. bugger that, get the SAFCII or the SAFC Neo.

ive got safc1 already installed so im gonna have to put up with it...where did you buy ur sitc from?? and what was it worth???

As I mentioned in a PM.

Using a Z32 with the SAFC is 100% pointless as the SAFC bends the voltage back to what it would have been with the stock afm.

As a result if the stock afm were maxed out yet the Z32 is outputting say 4volts. The safc will increase the voltage back to the maxed 5.1volts so the ecu against see's 5.1volts as it did with the stock afm.

Stick with the stock afm, stock injectors and a nismo fpr in your case.

IF you were to have the ecu remapped with a high flow then do consider the Z32 and ca18det or gtr injectors.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...