Jump to content
SAU Community

Bits and Pieces F/S

poop
 Share

Recommended Posts

poop Community Regular

poop

Posted
Posted

G'day all! Got some stuff I'd like to get rid of. In Brisbane, can pick up. COD is extra at your cost. Prices are FIRM but if you think that i've really over priced something, i am willing to listen. pics can be seen at:

http://au.f1.pg.photos.yahoo.com/kklyeung

-Apexi pod filter for WRX. (filter is all i've got, no brackets, no screws etc. could possibly be suitable for other cars as well)

$90 VGC

-ItalVolante (good brand, comparable to MOMO's) Leather steering wheel with HICAS boss kit off my R32. Good condition, but has a bit of white paint on it (dont know why...)

$110

-Cusco adjustable rear upper arm for S14/S15 but according to Cusco's site:

http://www.cusco.co.jp/02ctlg/2sus/sus_4.jpg

it should fit R33/R34 including R33/R34 GTR's as it has the same product code (not too sure though). Ideally used for fanatics who wants perfect suspension geometry or for people who have lowered their cars too much and is suffering from excessive camber in the rear. Used, but still in VGC.

$400

-MOMO gear knob. Still like new. Used for only a little while. Comes with all the extra attachments for different cars.

$100

-Alpine double din head unit. 3 in-dash CD with flip down cassette player. Full face display with 7 band EQ. Has 3 sets of RCA outputs-front/back/sub. Japanese model. Needs band expander for Australian radio. recc retail for it was around $2000 plus when new.

$450

-HKS Electronic Torque-split Controller. Used by me from new. Allows adjustment of desired torque amount for the front wheels up to 50%. Everything is still in perfect condition. Just plug and play. Doesn't require soldering etc.

Only suitable for R32 GTR or GTS4

$750 (will have pics of this later)

-JL Audio 10-inch subs (2) in a custom box to fit on top of the step in the boot of an S14 (still gives access to spare tyre without the need of removing box). Good condition.

$200

-ARC Blow off valve with piping to suit R32 GTR. It's not the one that fits the original position, but the one that fits on the rubber pipe next to the airbox. This is used for big twin turbo set ups when 2 blow off valves aren't releasing the air quick enough between shifts and this one only acts as an auxillary. I have no need for it as i dont have big turbos on my car (at the moment anyway ;)). Blow off valve on its own could also be used for other cars.

$150 VGC

-Lonza pedals with teflon rings. Also included are new anodised blue rings. Used but still good.

SOLD!!!!

could possibly have more things to add to this list in a few days as I'm finding more and more of this stuff whilst clearing my shed.

Please reply here or email me:

[email protected]:

Link to comment
https://www.sau.com.au/forums/topic/20633-bits-and-pieces-fs/
Share on other sites
poop Community Regular

poop

Posted
  • Author
Posted

002NVS:

I'm sure that it wont bolt straight up into an S15. An adapter plate must be made but dont know how much that would cost though...

SKYBEE:

The pics are up! check them out on the link in the 1st post. The subs cost me quite a lot when i had them custom made because the space i wanted them to fit into is really small so i'm really after something around the 200 dollar mark. I've had them for about 4 yrs. I really wouldn't want to send them to VIC for you as it would probably cost an arm and leg just for postage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Kinkstaah
      Fender flare widths across front/back of car

      By Kinkstaah · Posted

      Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • No Crust Racing
      Torana Lx Gtr Hatch, Lots Of Pictures

      By No Crust Racing · Posted

      What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • JC71
      gauge needle removal

      By JC71 · Posted

      found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • shortyboy
      Ignition coil upgrade

      By shortyboy · Posted

      I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...