Jump to content
SAU Community

Recommended Posts

Used DBA5000 2 piece slotted rotors 324x30mm to suit Front GTR Brembos - better than the DBA4000. New they are about $1000. You can replace the disc part (reusing the hat) for about 400-500. Discs are probably about half worn. *SOLD*

Brand new, still in box Ferodo DS3000 pads to suit front GTR Brembos. *SOLD*

2 sets of used Ferodo DS3000 pads, to suit front GTR Brembos about 50% left on each set. *SOLD*

1 set of Titanium shims to suit front GTR Brembos. These block the heat getting into your caliper/fluid. *SOLD*

hey Ferni I need some rotors, was about to buy some RDA slotted but I reckon these are a better option... will they get me through a couple of track days before they need replacing? who does the replacement disks for them?

Yeah they will last ages still... Much better than RDA in my opinion.

DBA will do the replacement discs for them... through anyone who sells DBA discs... Brake places, Repco, Bursons etc..

Give me a call Nick.. i'll pm you my number.

Naaa for a set of 2 discs... about 200-250 each disc i think... that's when i priced them when i bought them last year.

Call burons and ask for a price on DBA5000 replacement discs (Without hats) for GTR brembo rotors (324mmx30mm).... You'll get a better price if you can get trade on it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...