Jump to content
SAU Community

Recommended Posts

Hi! I've been reading this forum for a rather long time, but never posted here. I am fom Russia and I've imported my car about a year ago. I've already pretty much sorted out the suspension, transmisson and exterior. Now I'm up for a turbo upgrade, so I would appriciate if you give me a couple of advises. So, I have an HCR32 with RB20DET and MT. Currently I have a Nismo G-Max twinplate clutch, Trust cat-back, custom front pipe, Greddy Type M FMIC, HKS SSQV fitted. And HKS 2530 + HKS outlet (used, but in great condition), S-AFC Neo and APEXI pod filter - laying in my garage. Next I'm going to buy GTR injectors + resistor, Walbro 255 l/h pump, Greddy Profec b Spec2 Boost controller and 1.2 metal head gasket (in Russia the fuel is not that great, so it's adviced to avoid detonation). Then I will have my stock ECU remapped for my specs and delivered to me from a workshop in other city (yeah, here it's not that easy to find someone who can remap even a stock ECU). Now the questions :P I've bought a SAFC to avoid the stalling, apparently, caused by BOV. So, can I install it and tune it only to solve this problem (stalling), and later when I'll have all the above stuff fitted, tune it on a dyno? Am I right, that it would be possible to fine tune the car (with a remaped ECU) with a SAFC? And please comment on my specs (maybe I need something else).

Link to comment
https://www.sau.com.au/forums/topic/206849-couple-of-questions/
Share on other sites

aparently the SAFC NEO that you have has an option for off throttle fueling or something which should stop the stalling caused by the bov even though it would be cheaper to put the stock one back on.

anyway.

yes it is also possible to fine tune the car that has a remapped ecu, using the SAFC NEO.

Does anyone know what's this option and how it should be changed? And about going back to stock - it came from Japan this way, so I didn't have the stock one. I tried to find it, but failed. Anyway now I have the SAFC, so for me it's cheaper to tune it and leave the BOV.

Edited by (Dillinja)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...