Jump to content
SAU Community

Recommended Posts

I build an rb26 for 600whp-440wkw..

My specs

HKS Pistons, Rods, Cams(272-9,32), gears, timing belt

Nismo oil pump with all mods for oil problems (external oil return,tomei oil galley)

Single turbo HKS T04Z 0.81 with divided manifold (XS Power) and with XS Power external 50mm wastegate

All studs ARP, All gaskets TOMEI.

A little ported head..

All bearings ACL

800cc sard injectors stock fuel rail

1 intank walbro and 2 external walbro with surge tank

600x300x100mm fmic intercooler

3" exhaust

I need splitfire coils? What the problem if I don't buy them?

The same questions for uprated ignitor?

And for damper pulley?

I'm just using splitfires (no upgraded ignitor) in my RB28 with 522whp. Maybe just get your std coils checked out and try them. There's nothing to loose really and then if you need the splitfires etc buy them then.

I've got an ATI one on mine to be safe. Not sure what the std one is good for.

Still using the std ignitor. Have a search for testing the coilpacks. It's been covered before.......somewhere.

Edited by jonn

When your doing a power run, the tuner will know the coil packs are having troubles keeping up by how the engine miss's.

if you run the car up on the dyno and make power with no issues you know they are OK.

I think i remember beer baron saying that on the HKS drag car they still run the stock coil packs, they are better then split fires when they are in good condition.

So take your chances, they might turn out to be all ok.

arent those xs power items china stuff? You already got the good gear...might as well fork out the extra for the name brand? I got splitfires and the hks twim amplifer..also running ati balancer

Yes china stuff.. but xs wastegate I read that work fine... and the xs manifold I will improve its strenth with brackets! Again I read for this manifold for rb26 signle that it is good quality and they don't broke! I think that also the 6boost is china stuff same with xspower but as I read many people use it!

6boost isnt china made you idiot. Its made locally here in AUS.

Have you even researched where its made? And by whom?

Doesnt sound like it at all

The poor man pays twice, i suspect days it will also happen in this case

I would change the balancer on any built rb26 motor as I have seen a lot of factory items flogged out. I believe that this is probably the reason behind a lot of broken oil pumps. I build a lot of sr20's and everyone one of those Ive seen with a broken oil pump has had one of those GFB solid pulleys fitted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...