Jump to content
SAU Community

Huge Ask Need Rims For The Grand Prix Auto Salon


Recommended Posts

has anyone got any spare rims? lol that are nice as that will fir an r32 gtr very nicely?

they will not be driven on if you dont want. ill even change them when i get there..

the cars going to be sitting there for 4 days so, if anything it will be driven less than 50 km's

that is if i have to drive it to the actual cbd

i know its a big ask

anyone? lol

we can work something out.. pm me

dsc00105dy3.jpg

as you can see the rims i have on there atm are the actually hang on, I have bad gastro. 2 secs. ahhh thats better..ing gay

worst offset ever

im doing the grand prix thing to help out a friend, so i guess i wouldnt mind making my car up to standard with better rims!

thanks in advance!

Edited by bLaQ.bOi

I think they look hot mate despite the offset. Unfortunately I dont have spare rims I can lend nor can I take off my own rims. They wouldnt look particularly good on your car anyway.

lmgt4's would be nice

however the rims i have on atm them gay advans... are 9.5 all round... not sure about what the offset doover is

atm kell's vs kf's i think might be the go!

thanks for everyone who wanted to help out!

also umm... lol embarrassing as.. on my front right rim.. one of the nuts that hold the wheel on... well there size 17 right... but its been like grounded down to a 15.. because someone tried to get it of and it didnt budge...

anyone got any ideas?

Edited by bLaQ.bOi
lmgt4's would be nice

however the rims i have on atm them gay advans... are 9.5 all round... not sure about what the offset doover is

atm kell's vs kf's i think might be the go!

thanks for everyone who wanted to help out!

also umm... lol embarrassing as.. on my front right rim.. one of the nuts that hold the wheel on... well there size 17 right... but its been like grounded down to a 15.. because someone tried to get it of and it didnt budge...

anyone got any ideas?

hammer a socket on thats like a size to small....it'll be tight as obviously....then it'll crack the nut....

18 x 9.5 +12

you probably wouldn't want to drive on them but at the show they would fill the guards pretty well I think.

^^^ tried that numerous times! i think i need some kind of rattle gun thingo

r33 stockies, man nah then all the attention will be on the rims n not the car. infact rims as rare as them deserve a whole stand for themselves, thanks anyway. but i am unworthy!

Edited by bLaQ.bOi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...