Jump to content
SAU Community

Attn Black R33gtst Owner

Mr Sniper911

By Mr Sniper911,
in South Australia

 Share

Recommended Posts

Mr Sniper911 Community Regular

Mr Sniper911

Posted
Posted

Directed at the driver of Black R33 GTST Rego SKR-033

Mate,

Before you get behind the drivers wheel again think about what you are doing, The display of stupidity that you put on tonight from the Salisbury Hwy to Past the Hospital in Elizabeth was completely retarded!

Not only do you have an exhaust that you could no doubt hear from km away you decided to become a race car driver and weave in and out of traffic, AND you decided to attempt to drift it while doing this. PLUS you were doing stupid speeds and overtaking cars where it was clearly not safe to do so, then to top it all off, going past a hospital you see people on the side of the road so you show off and "hang it sideways"!! Did you even see the 2 or 3 children on the next corner? They could have stepped out? But no that didnt stop you, you continued to speed, i mean you must have been doing more than 100 in a 50zone to disappear into the distance. Grow some brains mate, its not just you on the road, and because you choose to do this in a skyline you affect us enthusists as well, we do the right thing and dont attract attention, but because of idiots like you we all get labeled HOONS!

If anyone knows this tossa, knock some sense into him!

I also noticed that you have the car for sale..... good luck i say!

Hope you have fun when the Police come knocking at your door soon!

There is a time and a place for stupidity, and its not during heavy traffic and not on public roads!

/end rant

J

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Link to comment
https://www.sau.com.au/forums/topic/208180-attn-black-r33gtst-owner/
Share on other sites
SLED Grand Master

SLED

Posted
Posted
Directed at the driver of Black R33 GTST Rego SKR-033

Mods if you feel the need to remove, do so, i just wanted to express my frustration!

Congratulations for giving police more ammo against us.

Pretty soon none of us will be driving skylines.

Don't remove this mods......'name and shame' is probably the only way to teach this clown.

benny_blanco Proficient

benny_blanco

Posted
Posted

I agree shame the fool,

Its dickheads like that why Import owners get pulled over and harassed / defected and pay high insurance.

Fair enough If he wants to have some fun, but atleast he could choose a more appropriate location / time to do it when he isn't putting others at risk.

I hope with skylines getting cheaper and cheaper they dont end up like old commonwhores and the reputation they have with dickhead drivers :thumbsup:

andz Mentor

andz

Posted
Posted
maybe we should all give the guy a few prank calls :D

i thought of that as well when i saw the carsale ad

Name David

Suburb Hillbank

State South Australia

Post Code 5112

Mobile Phone 0404872462

feel free to call David anytime after midnight if u cant sleep, wake him up with you

Import S13 Veteran

Import S13

Posted
Posted
good god, the story gets worse... its Auto :(

... No dis-respect to anyone on SAU who has an auto skyline :(

*kicks benny_blanco in the balls*

AAAAUUUTTTTOOOOO!!!!!!

from someone who went from manual to auto, its alot easier to drink and eat while driving haha

oh, and to you SKR033--------- :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...