Jump to content
SAU Community

S2 Headlight Problem.(check Yours)

bluesky4me

By bluesky4me,
in Four Door Family & Wagoneers

 Share

Recommended Posts

bluesky4me Community Regular

bluesky4me

Posted
Posted

Hi all.I have just replaced my third headlight globe in not to long a time (S2)...the first 2 were on the drivers side..the 3rd on the other side.

I had noticed moisture in my headlight at times but have only now put 2 and 2 together. The seal on the back of the light is so good that it seems to trap moisture which in turn starts to corode the wiring near the globe.What I have done is to drill a tiny hole in the back of the covers to let air in. I hope this will stop the condestion and also the corotion causing the globes to blow.

Not a major issue but could cause a short and probably shortens the life of the globe.Worth a check as the recent one was so coroded that any longer and I would have had to replace the wiring going to the globe.A job that would probably require the headlight to be removed.

Cheers.

Scott

Link to comment
https://www.sau.com.au/forums/topic/208281-s2-headlight-problemcheck-yours/
Share on other sites
mike40sydney Experienced

mike40sydney

Posted
Posted
Hi all.I have just replaced my third headlight globe in not to long a time (S2)...the first 2 were on the drivers side..the 3rd on the other side.

I had noticed moisture in my headlight at times but have only now put 2 and 2 together. The seal on the back of the light is so good that it seems to trap moisture which in turn starts to corode the wiring near the globe.What I have done is to drill a tiny hole in the back of the covers to let air in. I hope this will stop the condestion and also the corotion causing the globes to blow.

Not a major issue but could cause a short and probably shortens the life of the globe.Worth a check as the recent one was so coroded that any longer and I would have had to replace the wiring going to the globe.A job that would probably require the headlight to be removed.

Cheers.

Scott

the headlights are ment to be airtight seal this prvents mosture from entering the light.when mine was complied they drilled holes for wires thru back cover and it was getting moisture in .since i have converted back from the dark ages to the zennons as god ment it to have and i sealed the holes i have never had a problem since .regards mike

bluesky4me Community Regular

bluesky4me

Posted
  • Author
Posted

Yeh I assumed by the type of seal around the cover that it was meant to be air tight..problem is it is not..moisture is getting in somewhere to cause the corrosion..letting air in.. to stop it turning into a greenhouse is what I am trying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...