Jump to content
SAU Community

Recommended Posts

hi. i'm only new on here and not sure if any of this has been covered before so if it has please direct me in the right direction.

i have recently bought a r33 s2 which i love. i have a few issues though, when i drive up a driveway there is a really strange creaking/groaning sound from the rear end of the car. it has been lowered and i think that it does lift up one of the rear wheel when it goes up/down a driveway on the right angle. somebody mentioned it was the sound of the body just straining because of the lifting of the wheel? not really sure though...

the other problem is that whenever i'm trying to park it nearly always stalls. nothing to do with the operating the clutch, it just struggles to want to idle sometimes. i'll slow down to park and with the clutch pedel pushed in, and my foot on the brake it will sometimes drop to like 300rpm for a few seconds then build back up or sometimes it will stall. if it doesn't stall at that moment, when i then reverse and feather the throttle it will nearly always stall then. never happens at traffic lights though so i dont get it??

haven't checked the plugs or anything but just wondered if it was something common with these cars that someone could help me with??

also my car is running 2.5" cat back exhaust. if i put a new dump pipe on it from turbo to cat will it change the sound at all and will the performance be noticeable? car is only running std boost at about 5 pound. my next question is with the front mount that it already has, what is max boost i can run safely and do i need to do anything to run more than 10 pound? i've heard i might have to install a bleed valve or something?

Link to comment
https://www.sau.com.au/forums/topic/208617-strange-noises-from-r33/
Share on other sites

no idea about your idle problem, and the creaking noise is probably worn bushes in the rear, sway bar or control arms probably. Have a good look at them all.

but the good news is getting to 7psi all the time is easy - have a look at this thread http://www.skylinesaustralia.com/forums/HO...ost-t42895.html. if you want more 10-12 you need a boost controller of some type.

what else will you need to run more boost? nothing if you are lucky, but if your plugs, coils or AFMs are getting old you will have missfire problems until you fix them. And if it starts pinging look at cleaning injectors and replacing fuel pump

are control arm bushes or sway bar bushes expensive to buy and is it worth the hard polyurethane bushes? never used them as never needed to replace bushes in any car before? do they make much difference on the road?

also is it possible to replace them by yourself? haven't had my skyline up on the hoist yet as i've only had it for a few weeks now. i'll probably need a press to change them wont i?

i've been reading through the topics on this forum. it seems if i earth out the solenoid on the wastegate then it will run 7 pound all the time, but what about if i put a new dump pipe on it? its only std at the moment. will this increase the boost by maybe another 2 pound?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...