Jump to content
SAU Community

Fs: R32 Gtr New Engine

booosta
 Share

Recommended Posts

booosta Rookie

booosta

Posted
Posted (edited)

Make:Nissan

Model: Skyline

Milage: 56,000kms

Transmission: 5 speed manual

Colour: gun metal grey

Location: Perth W.A

Complied? yes

RWC supplied? N/A

Currently registered? yes

Price: $27,000

Contact: 0415 959 134

Comments / Modifications: new engine, turbo's clutch etc

Images: yes

Hi all,

My brother is selling his 1990 R32 GTR ( import) the car is completely standard apart from the fitment of R34 GTR steel wheeled turbo's ( the car has never been boosted above standard) still has original restrictor. This vehicle was purchased for over 30k two years ago and the valve hit the piston so the engine has been totally rebuilt ( all receipts) over 14k. The engine has new arias forged pistons, rods, n1 oil and waterpump, new r33 GTR crankshaft, new balancer, clutch and many other numerous parts.

Car runs beautiful and needs nothing and is an unboosted original example not a 18k shi##er.

Details are as follows

1990 GTR

gun metal grey

56,000kms

standard GTR rims with new G3 potenza tyres

rebuilt engine

R34 GTR turbo's

tinted windows

Alarm

Price $27,000 o.n.o

The body, paint, interior, mechanicals are perfect, this is the best R32 GTR I have seen, if you are serious about buying this car give me a ring on

0415 959 134 name is Troy any mechanical inspection is fine.

Thanks

Troy

post-19845-1204461180_thumb.jpg

post-19845-1204461190_thumb.jpg

post-19845-1204461206_thumb.jpg

post-19845-1204461216_thumb.jpg

post-19845-1204461224_thumb.jpg

post-19845-1204461236_thumb.jpg

post-19845-1204461248_thumb.jpg

Edited by booosta
Link to comment
https://www.sau.com.au/forums/topic/208640-fs-r32-gtr-new-engine/
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      iPad gauge cluster

      By PranK · Posted

      Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...