Rb 25 Turbo And Support Modes Ready But.....

[335]

Hello

I am ready to put my RB 25 turbo onto my RB20 R32 GTS-T and yes I have the elbow. Question, I know it is a good idea to have fmic or a R 33/34 smic, but what if I went with only the smic(stock or R34) instead? I can't buy the fmic right now and don't have the extra cash for tuning even if I did for the next month.

I don't want to risk blowing my engine because of not tuning, so should I wait to put on the RB25 turbo?

Modes I have now are Aplexi pod, catback exhaust with a cannon tip, turbo timer and boost gauge. Soon to get a split down pipe and boost controller.

Help please, I have to put a turbo on soon, have been driving without one for a month now.

Edited March 4, 2008 by 335

[RB32]

Hey

My advice to you would be to have your tune booked in straight after the r33 turbo installation.

give or take a few days.

whilst driving with the turbo on i wouldnt take it past 3000rpm until the tune.

An r34 sidemount would do the job but id go the FMIC.

Justjap coolers are perfect.

Cheers

[335]

Hey

My advice to you would be to have your tune booked in straight after the r33 turbo installation.

give or take a few days.

whilst driving with the turbo on i wouldnt take it past 3000rpm until the tune.

An r34 sidemount would do the job but id go the FMIC.

Justjap coolers are perfect.

Cheers

Cool Thanks, won't put it on until I am ready for the tune. On goes the 20 turbo until than.

[r32woohoo]

You could put the rb25 turbo on and run it no problem

just dont run more then 10psi, actually the actuators on them are only 7psi so thats the most you can run until you get a boost controller anyway

You didn't list anything thats tuneable either, unless you're talking about a remap

side mount would be fine until you start running more boost