Jump to content
SAU Community

Recommended Posts

hmmm sounds like DT panels its gonna be.. gotta see when im free so i can organize a time to take my car over for a quote.. need to start saving up and stop spending the money on alki im sick of the paint looking so messed up it just ruins the look of the car

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

about a 1minute walk from my house is POPES RD SMASH ... off Chanlder road .... they have a respray oven in there .... lets just say i had the inside info that they got a bunch of hail damaged cars from a caryard and fixed them sprayed them and gave them back for a yard owner to sell at orginal price before hail damage .. and he was very happy with the outcome of the work ... ask for Paul

Edited by RBPOWA
  • 2 months later...

you can always prepare car ur self with primar and all and then just get a pro to respray the hole car end up being cheaper and you know for your self u will do good job prepareing it aint that hard to prepare it for a respray unless there is major pannel damage then u gotta have pannel beater fix that. but just only an idea

you can always prepare car ur self with primar and all and then just get a pro to respray the hole car end up being cheaper and you know for your self u will do good job prepareing it aint that hard to prepare it for a respray unless there is major pannel damage then u gotta have pannel beater fix that. but just only an idea

Yeah thats what im doing.. my mate knows a sprayer, so my mate is gonna show me how to prepare the car, so ill get a few different guys to help me with that, then give it to him to touch it up.. still would save alot of dosh.. 1 of my quarter panel's is fcked so im just gonna leave that and pay for that to get fixed.. everything else i should be able to strip the car and sand it down and prepare myself..

Yeah thats what im doing.. my mate knows a sprayer, so my mate is gonna show me how to prepare the car, so ill get a few different guys to help me with that, then give it to him to touch it up.. still would save alot of dosh.. 1 of my quarter panel's is fcked so im just gonna leave that and pay for that to get fixed.. everything else i should be able to strip the car and sand it down and prepare myself..

Yeah, and end up like my brother's car that looks like crap. It looked better with faded paint haha

Leave it to a professional, Vu is cheap :D

My mate thats helping me out did his car.. He said it wasnt the best job that he did because he had a buyer already for it so just wanted to get it looking good enuff.. It looked mint as he got 'Ferrari Red' color on his 32.. If it comes out anything like his did then i'll be happy :D

He ended up paying:

Paint - $350

Prep - $Free

Spray from a Panel Beater friend of a friend - $750

Havent decided it all yet.. Still might go with Vu.. but i dont mind doing it myself since i guess it gives me something to do.. Can always get the panel beater to touch it up a bit if it is fcked.. But my mate knows what he's doing so it shouldnt be too bad

Yeah thats what im doing.. my mate knows a sprayer, so my mate is gonna show me how to prepare the car, so ill get a few different guys to help me with that, then give it to him to touch it up.. still would save alot of dosh.. 1 of my quarter panel's is fcked so im just gonna leave that and pay for that to get fixed.. everything else i should be able to strip the car and sand it down and prepare myself..

yea dood dont listen to people who say that dont do it your self if u low on cash do what you want, i suggest get that quarter fixed and the pannel beater will prepare ithat quarter anyway for spray thats one part done, yea and if u mate knows how to prepare then tell him in full point on how to prepare its not that hard to, before you bring it in to the sprayer get him to look it over and you might do few finnish touches or he might do them if it wont cost ya, plus its your own car you should be able to do a good job preping

LMAO dix its goin 3 ways boyz! dezz, llama n me :down:

I got my 33 painted by Vu n the boyz over a year ago and I still froff over it today! And mind u it wasnt easy to get it to that stage was it Vu :( Vu had a mammoth job spraying my car. Plus a so called "professional" prepped areas of my car up, only to have Vu rework his mess, so be very careful with DIY!! Now im back there in the next few weeks to get some wider front guards put on, sprayed and colour matched. Ive also got an S14 @ his shop getting custom work done and then a full respray/colour change, I have 100% faith in the DT crew!!

Seriously Vu, ill b comin round this week sometime........ Promise!! :P

PS: I dont care if my mumma says Vu is expensive, id still take my car down there for a quote(hinty hinty).

  • 2 weeks later...

im in SE suburbs

hey mate i dont know if anyone has said this or wether your cars been painted. i didnt want to read all of your thread. :)

go to as many panel beaters as you can and ask them if they would paint your car if you did the prep work yourself; make all panels and kit straight.

sand it back, body filler, and primer. if you have time and the right tools this will save you shitloads of money, and you can get a better paint job with the money you save.

i fixed my damage and prepped it for paint. but ive had some experience in panel beating. im still waiting to get it painted. lol.

i have photos of my repair job, if you want to see what a home job looks like.

goodluck

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...