Jump to content
SAU Community

Recommended Posts

This has been mentioned a few times, but also make sure you get 2 mufflers to reduce cabin drone instead of 1 muff 1 hotdog or whatever.

Interested to see what you get as i'm in the same boat but don't wanna spend 1k+ for a jap one.

Edited by webng
Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3709707
Share on other sites

mmmmm. where to start

ok.

Just Jap sell a bellmouth 3inch stainless steel turbo-to-cat pipe for $220 delivered roughly. get that.

get a high flow cat converter

for the rear, I believe a R33 4door cat-back system will fit BUT it will need around 30cm welded on in length.

you do NOT need 2 mufflers.

A nice 3" straight through muffler (i use a Kakimoto gtr-racing muffler) is fine, best just to get an exhaust shop to fit the front section, measure the back section and then custom bend the pipe section from cat converter to muffler, welding the muffler on for you.

easy.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3709719
Share on other sites

  • 2 weeks later...

i got a quote from everlast mufflers for a complete system, dump pipe, (bolted strait to the turbo) apparently theres some type that bolts onto the stock pipe :S. high flow cat. and the bak has 3 inch mandrell bent stainless steel with a cannon for $1600. he said he could do a 1200 one using cheaper metals and lower qaulity cat. and if i wanted i could mix and match... what do you guys think of this :S is it just me or is it fu*kn expensive?

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734330
Share on other sites

well i have a split dump, highflow cat and 3.5" Greddy cat back system and i paid roughly the same price from memory......if your going for an aftermarket option then definatly worth spending the extra on a good quality metal pipes mate....its a good upgrade and highly recommend a good quality system...i have had it for a couple of years now and its given me no problems at all....apparently D&T and AAA exhausts are very good with prices and quality workmanship....AAA recently gave my mate a quote on using stainless steel from turbo back $1200

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734353
Share on other sites

for the rear, I believe a R33 4door cat-back system will fit BUT it will need around 30cm welded on in length.

you do NOT need 2 mufflers.

I've got an R33 system (twin cannons) about to be fitted to my Stag. I'll take note of any changes/problems and give you guys an accurate account of how it fits.

BTW I'll be throwing on a muffler between the cat and cannons to quieten her down. :D

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734556
Share on other sites

AAA recently gave my mate a quote on using stainless steel from turbo back $1200

Don't forget, there are different grades of stainless steel.

Some SS systems can still rust easily.

:D

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734569
Share on other sites

i got a quote from everlast mufflers for a complete system, dump pipe, (bolted strait to the turbo) apparently theres some type that bolts onto the stock pipe :S. high flow cat. and the bak has 3 inch mandrell bent stainless steel with a cannon for $1600. he said he could do a 1200 one using cheaper metals and lower qaulity cat. and if i wanted i could mix and match... what do you guys think of this :S is it just me or is it fu*kn expensive?

Demand and supply.

Lots of people want exhaust work and are willing to pay what the shops ask.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3735207
Share on other sites

go to exhuast technologies and speak to marky, he is good with prices and everyone knows his shop and product, highly rated and great quality, or D&T at salisbury and speak to gav, he is the person to talk to bout import exhuast systems.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3735935
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...