Jump to content
SAU Community

Indicator Noise But No Light

uneek

By uneek,
in General Maintenance

 Share

Recommended Posts

uneek Enthusiast

uneek

Posted
Posted

I have this problem where after I use my indicator I keep hearing the noise sporadically for a few minutes. The indicator isn't flashing on the dash or on the car, it's just making the noise...and it's not the consistent indicator noise as it sometimes goes fast and then slow.

The only that that has been changed in the car since it happened was connecting the LED on my boost guage to the cigarette lighter wiring. Surely this wouldn't have anything to do with it? I dont know if the noise is mechanical or electrical though?

It's really weird...anyone had this prob before? It's an R33 S1 GTST slush

Link to comment
https://www.sau.com.au/forums/topic/210866-indicator-noise-but-no-light/
Share on other sites
_Sawyer_ Community Regular

_Sawyer_

Posted
Posted
I have this problem where after I use my indicator I keep hearing the noise sporadically for a few minutes. The indicator isn't flashing on the dash or on the car, it's just making the noise...and it's not the consistent indicator noise as it sometimes goes fast and then slow.

The only that that has been changed in the car since it happened was connecting the LED on my boost guage to the cigarette lighter wiring. Surely this wouldn't have anything to do with it? I dont know if the noise is mechanical or electrical though?

It's really weird...anyone had this prob before? It's an R33 S1 GTST slush

Its the relay you can hear ticking. if its ticking and your indicator lights arent, its not the indicator circuit or relay causing the problem. It could be an old alarm system relay ticking away. maybe try to locate the relay without pulling to much of ur dash apart

uneek Enthusiast

uneek

Posted
  • Author
Posted
Its the relay you can hear ticking. if its ticking and your indicator lights arent, its not the indicator circuit or relay causing the problem. It could be an old alarm system relay ticking away. maybe try to locate the relay without pulling to much of ur dash apart

thanks, i'll get a mate to check it out when we take the dash off to paint it. I have NFI what relays are but he should know. It may have been an aftermarket alarm as the little switch spot to the left of the steering wheel is empty, so something was there once but removed before i bought it

mattymagoo22 Community Regular

mattymagoo22

Posted
Posted

a relay is an electrical switch. If you turn off you radio then turn keys from 'acc' to 'on' you'll hear relays click on and the opposite is true when reversed. Voltage goes through a coil which pulls in contacts which completes the circuit (turns on the switch). The one that controls your indicators is called a 'flasher can'.

Good luck searching.

  • 6 months later...
Bokzed Apprentice

Bokzed

Posted
Posted

I also have this problem with clicking noise staying on for up to 10 minutes after indicator clicks off, been driving me insane but i should stop being lazy and actually have a look in there - Uneek, how did you go with this?

Cheers

  • 1 year later...
DJ-Static Collaborator

DJ-Static

Posted
Posted
I also have this problem with clicking noise staying on for up to 10 minutes after indicator clicks off, been driving me insane but i should stop being lazy and actually have a look in there - Uneek, how did you go with this?

Cheers

I've been in his car.. It's now worse than ever lol

kasanoff Collaborator

kasanoff

Posted
Posted

I had this happening to me - After indicating, the stalk would return to neutral but the clicking noise would continue double time.

I ended up taking the assembly off the column to test and i could see it shorting/arcing across the circuits when the stalk returned to the neutral position. I pulled the assembly apart, found the area that was causing the issue and cleaned it up a bit (there was grease everywhere and burnt circuitry in there). Put it all back together and it seemed to fix it for a while, but I think the damage was done and later it would short again intermittently. In the end, I just sourced a replacement stalk and threw away my old one.

Try pulling yours apart - you might be able to get away with just cleaning it up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...