Jump to content
SAU Community

Recommended Posts

STARTING APRIL: Classic skylines Australia's First Ever Go Kart Challenge!

Where: Ace karts: 20 Carrington Drv, Sunshine.

When: 16th April 2008, Just under One Month!

@ 7.30Pm

There will be 21 Spots avaliable for this event, Get it Quick!

10 Spots Remain!!!!

Followed by a Second Event Run Approx 3Weeks Later @ LeMans GoKarts :11-55 Waterview Close

Dandenong South,

The Winner Of Our Classic skylines Australia Cup will have to have the fastest Lap at Both Events!

Each event Will be individually Priced,

First at Ace Karts will Be at a Cost Of $60 and this will include:

Superkart Hire

12Month Licence for Ace Karts

10min qualifying session

And

15Min Race,

Totaling up to Approx 40 Laps,

Please Post your interest here,

Also feel Free to Contact me direct: 0415 161 052

Edited by mastadd

Ok were down to about 15 spots avaliable, as we get a little closer to the date ill put up the bank details so those that are in 100% can pay and then all we have to do is turn up and race!

Lemans price's have yet to be confermed, if we mention we know you do we get a better price or do we get charged more?

It should be about the same price, but were hoping for a little cheeper

10 Spots remain,

We have Competitors from The: r31skylineclub.com, Pulsarforum.org, Classicskylinesaustralia.com, classiczcars.com

Hope we can get a good turn out from Skylines australia as well.

Bank Details will be Up this weekend

Also Those who are intersted Can Email Direct @ [email protected]

Edited by mastadd
  • 2 weeks later...

as i haven't been able to get the bank details up soon enuf, ALll those that are coming i will pm u tomorrow to confirm and we shall see you wends nite!

Ok every one, the time has come, i havent been able to get the bank details up in time, so as itstands i have the following people who are in:

coupe72001 plus one mate.

and i need to conferm:

Skycab

cajfly

there are still a few spotts avalible so please post here or sms me on 0415 161 052, and ill call you back to conferm anything at all.



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...