Jump to content
SAU Community

R34 King Springs "low" Or "super Low"?hmmmmm

Alex G
 Share

Recommended Posts

Alex G Enthusiast

Alex G

Posted
Posted

Hey everyone!

im looking into lowering my R34 and i am tossing up between which king springs to get, the "lows" or the "super lows", i did read a few months back about something if you lower an r34 more than xxx cms the tire wear would greatly increase and the handling would be like a bag of potatoes, i have used the search function and couldnt find anything, so yeah anyone know the rough LIMIT that a R34 can be lowered without sacrificing too much handling/tyre wear???

thanx heaps in advance

:thumbsup:

Alex G Enthusiast

Alex G

Posted
  • Author
Posted
what about coilovers?

Yeah ive thought about coilovers but im kinda restricted budget wise :thumbsup:

but just out of interest would i need to get anything else with coilovers if i did buy them???

im still open for options....itll jus take longer :woot: lol, but simply put im lookn at doin a suspension overhaul as its pretty nasty round corners and bumpy ride, even though ive got the stock rims on it...

rgr34 Proficient

rgr34

Posted
Posted (edited)

lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

Edited by rgr34
R-SPEC Grand Master

R-SPEC

Posted
Posted
lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

can we get a pic of your car to see what height it sits at with super lows?

Alex G Enthusiast

Alex G

Posted
  • Author
Posted
lows dont lower it much i have super lows......stock shocks........ i did change the rubber boots and bumps stops to softer ones......it actually rides good doesnt break ur back when u hit bumps as springs are soft........saying that not the best for hard cornering handling and camber wear......but if ur on a budget like i was its good for the low look! last 6 months had no issues.

Cool, yeah i think im gonna go with super lows for now and later get coilovers when i got more money :) , wats it like to live with tho like speed bumps etc, it wont effect my decision much but just wanna know b4 i go get them.....oh and how much did u pay for your super low king springs alone???

rgr34 Proficient

rgr34

Posted
Posted (edited)

yeh as i said the springs rates are not hard so bumps arent a problem.... clears speed bumps too........on bad bumps it will bottom out occassionally but the bumps stops are softer kind of cushion it... i got my done at a workshop paid $470 thats 4 king springs, new boot and bump stops and alignment.......the kings springs to source yourself range from $180 to $200 from what i can remember.....workshop get it cheaper obviously.

Edited by rgr34
1R34SON Proficient

1R34SON

Posted
Posted (edited)

Hey all im getting super lows also but what i wanted to know is, Is there anyone that has done this or that will know if there will be enough clearance between guard and tyres?? - My tyres at the rear are 265 on 9.5" wide rims.

I got a price for everything including rolling the guards for $550. Can anyone tell me if cops would stick their fingers in the gaps and give me a yellow? Anyone who was at our cruise friday will know that having coilovers and very handy lol. But right now money points to springs.

Edited by MellowYellow
R32 project Collaborator

R32 project

Posted
Posted
Can anyone tell me if cops would stick their fingers in the gaps and give me a yellow?

if that was a legal way of measuring, all of those cars where it has body panels that go halfway down the rear wheel would be screwed....just say that if thats how the cop tries to measure your ride height....

1R34SON Proficient

1R34SON

Posted
Posted
if that was a legal way of measuring, all of those cars where it has body panels that go halfway down the rear wheel would be screwed....just say that if thats how the cop tries to measure your ride height....

I watched a cop do it to a large group of us, i think he was checking to see that there was enough gap between tyre and guard not how Low exactly.

Alex G Enthusiast

Alex G

Posted
  • Author
Posted
im getting super lows just for the rear this week

i shall return with before and after pics if anyone's interested...

yeah im def interested in b4 and after pics

was gonna get mine done this week bt pretty damn bizzy :D

can't wait now :D

skylinecouple Experienced

skylinecouple

Posted
Posted

You guys must be really young to want to lower your cars that much. Have you checked out any rally cars lately ? they can corner better than most because they don't bottom out around a corner and spit you across the road into an oncoming car. THATS why the police get upset with excessive lowering, especially in the rain. Standard lows or Sydney Kids group buy !! So tell me, how many porches or Ferrari's have adjustable race type coil and shocks ? Only the latest designs have. Why ? Because you can't beat a properly setup shock and coil. Bilsteins & the right valving with coils to match. OK off my soap box.

75coupe Grand Master

75coupe

Posted
Posted

If you use super lows on stock damper then your asking for more money to be spent in the near future to replace the shock and you will be sacrificing handling.

and also you will need offset camber bushes to correct the front and rear camber if you go that low...

why do it? for looks?

Do it properly use quality dampers with matched springs. Yep it will cost more, but thats what it costs to do it right and have decent handling, skylines are tail happy as it is without ruining the suspension any more...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Kinkstaah
      Jacks that fit under GTR lips that can reach the subframe?

      By Kinkstaah · Posted

      Whoops!
×
×
  • Create New...