Jump to content
SAU Community

Hey Guys I Been To Every Forum So Far About This And Haven't Had Any Help.. Can You Guys Please Help Me And Tell Me Whats Wrong With My Wiring.

hcr32sky240sx

By hcr32sky240sx,
in General Maintenance

 Share

Recommended Posts

hcr32sky240sx Newbie

hcr32sky240sx

Posted
Posted (edited)

Today i did some fooling around with different maf sensors..

today i took the n60 mafs off and out. I went and re-installed my stock rb20 mafs.

When i had the rb20 mafs wired up my car started right up with no starting fluid and started smooth but my idle was still high and now it started smoking black!!!

so i took the rb20 maf out and went back to the n60 mafs.

n60 mafs car wouldn't start without spraying starting fluid but once started and running i noticed the n60 mafs my car will not smoke black.

so one last time i went and re-installed the stock rb20 mafs again and car started right up smooth but was smoking black again..

and also while car running...

car running unpluggin the n60 mafs car will stall out....

car running unpluggin the rb20 mafs car will not stall out.

so what is going on guys? am I wiring my mafs wrong or something???

ecu is still not throwing any codes other than 55.

ok and this i just found out with some searching...

it seems lik when running the rb20 afm i just found out my rb20 maf is using a rb25 series 2 pigtail haress which i found out the colors are

White with Blue Trace - Ground

Orange with Black Trace- Signal

Black with White Trace - 12v Power

which tells me that is a series 2 rb25 pigtail afm

sooo hrmm yeah my rb20 maf is using a rb25 series 2 pigtail so sonmething is wrong.

so i'm guessing i wired something wrong.. Can you guys help me clear this up?

Edited by hcr32sky240sx
r32woohoo Rising Star

r32woohoo

Posted
Posted

sounds like you're running the wrong maf/afm then

rb20 ones have a green label on them with 4 wires

hcr32sky240sx Newbie

hcr32sky240sx

Posted
  • Author
Posted

i have the right mafs its green label its j60 which is rb20 but the if u reaad my post.. the problem

my pigtail is an rb25 series 2 and the wire colors do not match.."

so bascilly all i want to know is how to wire the pigtal to my rb20 mafs harness..

is that so hard???

and yes its stock ecu

Jmaac Proficient

Jmaac

Posted
Posted

You cant use other AFM's without changing the VQ table in your ECU - i.e. the voltages are scaled differently

R32 AFM is the same as R33 S1 AFM

Wire A - Not Connected

Wire B - Signal

Wire C - 12v Ground

Wire D - Signal Ground

Wire E - 12v Power

R33 S2 AFM is the same size and calibration as the other two

White with Blue Trace - Ground

Orange with Black Trace - Signal

Black with White Trace - 12v Power

Hope that helps

R33S2 Grand Master

R33S2

Posted
Posted

Im sorry but what motor is it RB20, RB25 or RB26? and what ECU is it?

I ask because it sounds like one of those AFMs worked, one was right for start up but too rich for normal running and the other the opposite, if the second one ran properly it may be the start up componants maybe faulty, check the ACC valve etc (I say etc because there are others that I cant remember ATM)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...