Jump to content
SAU Community

Recommended Posts

Yes thats right. R32 GTS-4 had RB20 turbo engine, and R33 GTS-4 has the RB25 normally aspirated engine only.

I have been looking for an R33 GTS-4 manual for over a year, and cannot find one that is for sale, but they do exist. There are quite a few automatics around, if that is what you want.

Link to comment
https://www.sau.com.au/forums/topic/21242-r33-gts-4/#findComment-448763
Share on other sites

Yes the R34 does come with an RB25DET plus AWD, but it would not come cheap.

The best option is to get an R33 n/a GTS-4 and turbo it yourself, a bit of work, but not impossible.

Another way would be to fit an RB26DETT to an R33 GTS-4, now that would make a very nice sleeper, and at around half the cost of a GTR as well.

If you bought an auto GTS-4 for about $15K, a complete GTR front cut for about $10K, you would have absolutely everything you need, plus you could flog off all the unused bits and recover a few dollars.

Link to comment
https://www.sau.com.au/forums/topic/21242-r33-gts-4/#findComment-449299
Share on other sites

Well.. I'm in the US. Skylines are a tad bit scarce here.

These pictures are the engine swap I'm buying, which has come from japan. And I really cannot find out exactly what it came from. All I know is that it is an AWD R33 RB25DET automatic.

I gather it's either from the Stagea or some sort of GTSt-4. It doesn't really matter, but I have been looking for information on it for a while now. And everytime I mention this engine or show pictures of it to people here in the US (or on a US Nissan forum), they think it has been modified in some way. I'm trying to figure out the truth. I know there was alot of variations of skylines out there.. but I've found no real information on the exact models and editions for each year. It obviously looks stock and unmodified IMO.

If it is from the Stagea though.. it is definetely rare. Because what I'm gathering is that there was only one year that the stagea even had the RB25DET AWD, and that was 96. The others were called VQ25DET's..

Who knows. Thanks though.

Link to comment
https://www.sau.com.au/forums/topic/21242-r33-gts-4/#findComment-449553
Share on other sites

Very interesting EJ6. The RB25 block used in the AWD version is different to the "normal" RB25 block. The oil pan rails are quite different, and some of the holes are much larger to take the studs which secure the alloy sump and front diff.

So there is the RB25DE, and RB25DET block used on the R33 and R34 rear wheel drive cars, and then there is the RB26DETT, RB25DE, and RB25DET neo blocks as used in all the AWD versions.

Your R33 has definitely been modified in some way, and there are two possibilities. The original RB25DE may have been fully rebuilt with all the RB25DET parts, but using the original (AWD) bare block, this is possible, but highly unlikely.

The other possibility is that someone has dropped in an R34 Stagea RB25DET neo engine. This engine is different in many ways to the original RB25DET, and is rated for 205Kw, if I remember correctly. There are many detailed changes including variable valve timing on both cams, and the top of the engine looks totally different. It should have "neo straight six" prominently displayed. If it does, you are a very fortunate fellow.

Link to comment
https://www.sau.com.au/forums/topic/21242-r33-gts-4/#findComment-450464
Share on other sites

Warpspeed, thanks for your help with this..

I've also heard that the RB25DET stagea is a bit more powerfull. I hope to god this is it, because that would be one cool thing.

It doesn't look like a neo engine either does it?

Could it possibly be a R32 GTS-4 setup? I am being told this is R33. And it definetely LOOKS like R33.. because it doesn't look very old.

When I get the swap, is there a way of telling for sure or not? I'm familiar with honda's and they all have engine codes on the blocks. Does Nissan do this too in any way?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/21242-r33-gts-4/#findComment-450782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...