Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Im considering a pair of bride seats but want to know how the compare to the R33 GTR factory seats.

Sure the bride's are lighter, but how do they compare as far as comefort goes... especially when going for a long drive of a few hours.

Also how do they compare as a seat to hold you in place when your cornering hard?

I've never seen a bride seat up close so i have no idea what the quality is like either. Are they as well made as a factory seat?

Pic of the seats i am considering is attached.

Cheers,

Ian

post-26553-1206703818_thumb.jpg

Edited by Vspec R33

Been for a ride in a friends car with Bride Recliners (ergos i think) Found them to be firm and quite narrow(so they wouldnt be comfortable on long drives, but great for trackwork). They appear to be well made, although i did notice some fading from the sunlight on the sides of the seat. I prefer my 33 GTR seats they are a good allrounder.

Is there any reason you are considering bride seat if you've never seen one or sat in one, as they are one of the most expensive? is it just for the brand name?

I got a sparco racing bucket and I think that is great... Never sat in a gtr seat but the gtr seat is still a reclinable and I feel would never match a full bucket...

I've done a few hours in it in one stint and while its a little warm on a hot day, I forgive it for that since it holds me in snug.

Oh and thats a sparco pro 2000

Edited by 75coupe

Truth be told the seats are for my vw. I like the GTR seats a lot though so i figured I'd either stick with what I know i like and get a pair for the vw, or i'd go something light weight, carbon fibre/kevlar/fiberglass or whatever. They have to be strong though too, and ADR approved. The vw is being rebuilt as a motorkarna drag and car, so I need to keep the weight down where possible as there is a fair amount of additional steel re-enforcing in the chassis now.

I dont care about the brand name and they would be covered anyway. Im not into showing off brands. Let the companies pay for their own advertising.

I've been looking at sparco's too. They seem decent enough.

DLOOOK, how wide is your ass that they are too small for you? Or perhaps what size chicks's ass would be a good fit to the seat?

Edited by Vspec R33

Brides are not adr approved. and only some models are FIA approved.

If you want ADR approved, and brilliant seats to boot, get some VELO's.....

Made in Aus, ADR approved, different sizings, FIA approved as well, and cheaper than the Brides.Look great, different colours, and, a lot more comfortable. :blink::P:thumbsup:

  • 4 weeks later...

I was looking at the Bride recliners the other day too. Very nice. Id really like to get a seat in them before shelling out for something i might not like though. I think R34 seats are the way to go, because they hold their value and if i dont like them i can move them on easily enough.

Well ive decided to stick with the old seats for a while till the car is driving again. Ive made much stronger seat mounts this time because last time I was out street tuning the car it tore the drivers seat spot welds from the floor in 3rd gear and I ended up in the back seat.

For those that PM'd me and wanted to see a pic of what Ive built.. here is the chassis nearly finished.

DSC00943.JPG

Specs are that its a 1966 VW chassis base, very modified and re-enforced

Wheel base, wheel track, steering angles etc are all identical to a Porsche 1992 968

Alignments of camber, caster, front and rear toe are all adjustable, and are set to a track tune for a 911, being a rear engined car.

1992 Porsche 968 front A-arm's, spindles and 4 spot porsche/brembo brakes

1992 Porsche 968 alloy trailing arms with 4 spot porsche/brembo brakes

1986 Porsche 911 turbo 4 speed, rebuilt by albins. Handles over 750hp, but it will be seeing about 500 max.

Hydraulic clutch conversion

Custom whiteline anti roll bars

Custom valved Tein super streets, (modified honda civic)

Porsche 924 rack and pinion steering conversion

Hargett racing short shifter

Porsche 996 Cup3 18x8 and 18x10's with RE55 semi slicks

Aiming for about 850kg dry weight with a roll cage.

Was engineered and approved 2 weeks ago. 100% road legal modifications. 14 modification codes in all. The silver vw body in my signature will be on it in about 2 months, and the engine in about 2 months after that. Engine parts are still being fabricated at the moment.

Yes I am crazy but building this in my garage has kept me out of a padded cell.

Cheers,

Ian

Edited by Vspec R33

i had a bride seat in my rx7 race car and well, ive got gtr seats in my gtr.. lol

its such a hard decision really.. like the gtr seats are fkn awesome, but so were the brides lol

They both look great, not that it matters coz when ur sitting in them, u cant see them :D

as far as value goes... dont brides cost alot?? they did 4 years ago :)

Yes the Zeta III's do look nice. Im sitting on the edge of getting buckets and having to un-bolt them every time i need to get into the back of the car, or keeping reclinables of some sort.

That VW is insane!! I'd love to do a project like that, except I cant afford it, Parents won't let me have the space, and don't know what I'm doing ;).

Bride seats usually look better and more sporty then the GT-R seats, but not sure which is more comfortable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...