Jump to content
SAU Community

Recommended Posts

so yesterday i was about to get in my car and head out when i noticed that i had a flat - and i mean REALLY flat, almost on the rim

it was just after 12:00 so like nothing was open (like many things in the glorious SW)

so i rang around and found a guy at a local Ampol that can fix flats at that time of w/e, i get out the compressor,

fill the tyre enough to get going and head downsome bearded man meets me out the front, he says he'll get the wheel off and dip it

to see what the drama is and to leave it with him as he has to finish up on some (hick's) ute he's workin' on

i come back, he tells me it'll be $35 and that he's dipped it and found that it had a large piece of metal buried in it and that he's plugged it.

i look over the tyre to make sure i have all my lug nuts and such. then i go home, park the car and go inside

- retiring the weekend as wasted, although my tyres are good to go.

getting something out of my car today i notice a rattle as i close my drivers door.

the friggin loon has used a two post hoist (i suggest) incorrectly and crunched my skirts!!!

my drivers side worse, but both damaged!

i called and took the car in, but he was closed today.

before i use of swears and ruin my chances of him sorting this out in a civil manner, what leg do i have to stand on?

i feel as though it's not my fault and why should i replace them (or even have them fixed) when i asked for a puncture sorted, not skirts smashed!

any ideas would be greatly appreciated...

did u tell him 2 use that hoist? if u did i do not think there is much u can do because u gave them the go ahead 2 do it!

good luck with it all just remember

that u get more flys with honey than vinegar. in other words do not blow your top at them and try to sort it out with nice words

did u tell him 2 use that hoist?

nah, he mentioned he was just going to jack it up and get the tyre off

i thought nothing of it after that, i didnt even think of how he may have done it until i remember seeing the hoist

Got insurance presumably? Most policies have coverage(no excess) for theft/damage from workshops, might be the go.

you serial? well, i guess i have a backup plan there... hopefully

thanks

dam idiots, i hate when places like this stuff up our pride and joys,

basically act polite and go in there, tell him what has happened and ask him how HE wants to fix it, be firm about what your talking about, talk with confidence but still use politeness if ya get me haha,

if the hick makes up a story and tries to knock your allegations back, take it a step further by going into more formal approaches,

similar thing happened with my mates commodore, went into a workshop to get something done, came out with a big paint chip on the door with what looked like touch up brush paint that was so noticeable, was on the passenger door so my mate didn't see it, he jumped in the car and found it about half a day later :laugh: this place has been known to push people around if you sound soft, go in there be polite but firm and confident and things should hopefully work out, worked for my mate ;)

hope this helps a bit........

sam

That is dodgy. I'm SOOO scared about f**king up someones side skirts. Even with a 2 post hoist you can avoid the side skirts. Like all these guys have said, go back and talk to him about it. Its his fault, so he should fix it.

Legal leg = negligence on his behalf. You paid him, he had a duty of care towards you as his customer - with that comes a certain standard of care that he must uphold. He was in breach of that by screwing up your skirts. So yes to legal leg - try talking to him about it, if it goes nowhere cheaper/easier option for you = insurance claim.

My 2c anyway :yes:

Edited by Nastazia

If you didnt notice the damage at the workshop, I am afraid you havn't a leg to stand on what so ever UNLESS he admits liability.

Bottom line is you have to prove he smashed them, as you didnt notice the damage straight away, he could reasonably argue that the damage wasnt there when you picked up the car.

Best bet, go and see the guy, ask him if he put the car on a hoist or not, if he says he used a hoist, you could point out the damage - he may be a decent guy, and like you, didn't notice the damage straight away, and be willing to fix it.

Good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • f**king around with the bro
    • Ludenham   44.2 tops day no issues  
    • Then today, I went to visit a man with an r33 hat Peter and Road and Race sorted the alignment. As it is being set up for general track/hillclimbs etc it has a heap of caster (7o), less camber than I am used to (1o front and 2o rear, as the caster looks after that in turns without the braking downsides), 3mm front toe out and 0 toe rear. Will see how that goes and track tyre wear to see if it does need more camber, but adjsustment is also limited with nismo arms and adjustable bushes at only 1 end. It does have a bent inner tie rod on the driver's side front but as it came up within spec I'll just leave that as is. So, that is getting close to my chapter of this story....could of tidy ups then a shakedown in early October before it finds a new home.
    • So, it went to Unigroup for a run in and tune on Friday, everything went (generally) well. In terms of fixes, the engine was good and there were no leaks. It needed plugs (I hadn't checked them because the coil pack cover was on a new engine and I couldn't imagine they weren't new.....but turns out the temporary plugs to just keep it sealed up were in there.....new plugs gapped to 0.8 and it was fine from there. Also, there was a little preload on the clutch slave which caused some slip. I haven't had the box off so I don't know what the clutch looks like; my guess it is brand new and the pedal had not been adjusted....backed that off a bit and it held fine. Last thing will have Dose crying....the idle especially when cold is a bit difficult between the cams, forward plenum, atmo blow off valve and an 80s air management system. It is fine when hot but a little uneven when cold, will see if I can sort or at least improve that one cold morning. Other than that, tuning went fine. It made 245 but was pulled back to 227 which 2 opportunities to improve in future. 1. The factory CAS is not great and was jumping around at high RPM, so Mark took 2 degrees out up top (that is why it stops making power and lost 20kw). Very safe this way and the extra power is available but will require a more modern ECU and better cam (or even better crank) sensor 2. The 2871 in factory housings is very big for a low mount, and the internal wastegate is too small, so it was creeping from mid range all the way to redline....the duty cycle on the boost controller is turned down a little for safety. That is much harder to fix, it would need a large external gate and that would require a whole bunch of other changes, so it will go as it is for now. It feels nice and healthy and safe, so should be good for about a billion laps like this.
    • what sort of caliper are they? If they are a slider and you gave everything a good clean, you might need to regrease the pins. My guess though is they will come good after some abuse as suggested above
×
×
  • Create New...