Jump to content
SAU Community

Recommended Posts

^^ Got your sms Kel, wont make it.. being pulled over twice in 1 week kinda put me off having my car on the road over the weekends etc and on cruises etc. Seeing as though a regency appointment is now apparently $198.. cant really risk or afford it

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

^^ Got your sms Kel, wont make it.. being pulled over twice in 1 week kinda put me off having my car on the road over the weekends etc and on cruises etc. Seeing as though a regency appointment is now apparently $198.. cant really risk or afford it

wat $198?? wen did this come in??

thats BS, oh well if mine gets defected it will be temporary track car lol

^^ Got your sms Kel, wont make it.. being pulled over twice in 1 week kinda put me off having my car on the road over the weekends etc and on cruises etc. Seeing as though a regency appointment is now apparently $198.. cant really risk or afford it

this is why i hate going out in my car on weekends mainly during the night! my car will also being in hidding :mad:

*paints car camo to hide

getting a rear wheel alignment friday so that night will be a good excuse to test out all the new cusco arms and nismo sway bar :(

sweet, all the sus is done i think its time for this half cut :P!

Edited by Import S13

lol not just yet Kye. still got the front to go. Brought some Cusco Caster arms but the bolts arnt long enough :( thinking i might need R33/R34 GTR ones. Damm 4WD.

Also slowly been doing stereo. After that is oil cooler then the RB26 :laugh:

Did any of you guys go to my last cruise?? Sorry i got a bad memory, also just letting you know why im doing this cruise is because an old friend of mine is coming over from port lincoln and i want to show her what i do in my life and stuff so i wanna try make this a good one. :laugh:

hey babe about half of the ppl i smsed for you are coming make the hills at the end some of them dont want to and then all the other ppl that dont want to go can leave befor the hill bit but come on the rest

love ya x x x

Thanks heaps babe love ya lots 2 x x x ill find out tomorrow what times im working on saturday and ill let you know if i can go to marion with ya kellie... xox

Edited by kahli
im erring on the side on no 1) meet point advertised and as Andrew mention police to troll forums to see who's behaving themselves

2) Fuel

3) having roast with Tom Cruise

Doesnt matter if you advertise the meet point on net..

1) cops do have better things to do

2) It will be fine if people stay calm and dont be stupid and have bonnets up.

3) I dont like Tom Cruise :laugh:

that would only be a cop shop one.

regency use to be $98 i think and now up around $150+

Nope. I went thru Regency and paid $54 to lift a defect for noise and taillights.

Simple. :laugh:

It is BS ... its $54 to lift a defect.

^^strange..

cos First defect 2 years ago was $98 at regency, second about 12 months ago was $140..

like everything.. the price goes up

Coming from a cop, and i know he wasnt talking shit..

Edited by *flick*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...