Jump to content
SAU Community

Recommended Posts

Hi!

Just wondered if anyone knows of someone I could call to check a car out for me? Its at a dealership in Brisbane, and everyone seems to need a few days notice. Have called RACQ and my usual guy who does roadworthys etc - but they cant help me out untill Monday.

Sooooooooo Im hoping can anyone recommend someone for me to call out for tomorrow?

Thanks!!

check it out as in mechanically??.... do it yourself champ.... first thing is check for smoke..... get them to start it up for 5 minutes... pop the bonnet listen for any suspicious noises... and put a 20 cent coin on the rocker cover... if the coin stays there its good:).... and once its warm tell them to punch the throttle up to 4 grand while u stand behind the exhaust.. look for smoke. then check engine bay and under carrage intensly for leaks of any sort... check tires for remaining tread and definatly check oil.

when test driving get a feal for the gearbox if manual to see if there is much meat left on the synchros.... maybe shift faster than usual once or twice throught 1st second and third and see if there are any clunks or grinds... next in a quiet back street stab the brakes fairly hard to a stand still to see if they are firm and solid....

im sure there is lots other people can add but these are major points covered

good luck

Edited by jenkies

Thanks mate - yup - mechanically is what I meant. I couldnt take hubby with me as he was busy elsewhere and my knowledge is limited to what it looks like LOL

Took it for a test drive today and the brakes feel good, clutch feels good. I used to have a manual EXA which is my only comparison.

Have left a $200 deposit and meant to pick it up tomorrow so will definitely use your tips!

Cheers, Manda

Thanks mate - yup - mechanically is what I meant. I couldnt take hubby with me as he was busy elsewhere and my knowledge is limited to what it looks like LOL

Took it for a test drive today and the brakes feel good, clutch feels good. I used to have a manual EXA which is my only comparison.

Have left a $200 deposit and meant to pick it up tomorrow so will definitely use your tips!

Cheers, Manda

Hey Manda

Also check all fluids. They must not be dirty and contaminated. Ask them to show you brake fluid, power steering fluid, coolant, oil and perhaps transmission fluid. Dirty or contaminated means trouble or poor maintenance. Ask if 100 000 service was done if applicable (this can be expensive). Ask if radiator was repaired or replaced. Check general condition of paint work , joints, door hinges etc.

TAKE YOUR TIME! I rushed through mine because i was mega excited. Had to spend $2000 to get up to standard.

Good luck, How exciting!

^^^^^ what iceberg said

i did all the checks all fluids all the rest... and poor maintenance was the case.. 3,500 to get it up to scratch... but the fact motor idled dead quiet no smoke, lining up km's (not rewound) and stuffed clutch i still bought it and did an extreme 100'000 km survice even though it had only done 80'000 km... plus upgrades :P its been perfect ever since plus it only came into australia 7 months ago

just out of curiosity what are you buying?

Will do!! Ta for that.

Yeah it is *very* exciting. First Skyline, been looking for ages.

just out of curiosity what are you buying?

Finally found exactly what I wanted: white 1997 R33 Series II ( manual, non turbo )

Gotta start somewhere hey !!

Thanks guys :P

Edited by Snoop74

Send an email to Dan from Elite Racing Developments, email is [email protected] - he's very thorough and knows his stuff, but is quite busy so no guarantees that he'll be available.

His name on these forums is 3lit3 32.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...