Jump to content
SAU Community

Recommended Posts

Hm, yeah that's probably inherent to these VQ Nissan engines...

Have read that the bottom end on these VQ engine is like 'glass' - they're a lot weaker than the RB inline 6.

If you want more bullet proof engine then stick with the RB of R33/R34, but they're getting old as well so all engines when they're getting old they are more prone to failure if being pushed.

Hmmm, bad assumption I think. Cars came from the same factory. What happens in USDM could happen to JDM cars.

Although a complete service history in Japan (if you can read them) may minimise those risk.

As quoted from Forest Gump and a forum member on this forum, Imports is like a box of chocolates, you never know what you're gonna get... can be something you like, or can be something you dislike.

So the problem seems to exist on local 350Z, and since the JDM V35 skyline has the same VQ35DE engine, I believe they should have the same potential problem, it's basically the luck of the draw when buying an import.

Lucky for that guy he won in court with his 350Z engine replacement, however for a V35 import not sold locally through Nissan, the owners of V35 Skyline would stand no chance in court - Nissan's lawyer is just gonna screw us badly for buying something not offered locally. They'll find hundreds of reasons and excuse not to cover it. So anyone who can't live with the risk buying a lemon should stay away from imports.

Any manufacturer's recall on any V35 skyline range will also not be covered by local Nissan dealers either, so we import owners are really left in the dark. If something happens to my V35, then I'll be forking out cash out of my own pocket to get it fix. I was lucky not to had any with my old R33 over 4 yrs of ownership.

Jarthel, My family members has owned lots of Toyotas since the 80s (we have a '07 RAV4 now) and none of them have had any problems with the engines - they're probably the best car to buy for people who want to play it real safe... :( If local Toyota doesn't appeal you, may I suggest to you an import Toyota Supra, Chaser JZX100, or Caldina wagon? I strongly believe they will be far more reliable than V35 Skyline.

I think if everyone change oil every 6 months or every 5000km the amount oil lost due to getting burnt won't be noticeable enough.

The problem is these days modern cars' service intervals are getting longer. Our Toyota RAV4 is every 10,000km service interval including oil change, and some cars I know has a 15,000 km service intervals. Some cars are used harder than the others and whenever the oil hasn't been changed in 15,000km, with a bad or incorrect oil in the engine, the amount burnt off could be seen as quite significant... It's a point to consider..

Still, every engine will burn oil, but at least car engines are not the old 2 stroke lawnmower engines which burns oil constantly, thank god for 4 stroke engine invention the oil burnt is a lot lesser than the older technology... My brother bought a brand new RX8 and the dealer gave him a can of engine oil and asked him to check his oil and top it up once in a while if the oil goes low. Rotary engines BURNS OIL since brand new. It's a known fact, and all rotary owners knows it... I think compared to rotary engines, the oil burnt by VQ engines on average should not be any more worse, unless you had a bad luck and bought a car with troubled engine.

would topping up the oil regularly avoid the problem? if yes, would there be long term effects with this? thank you

No. That's a band aid short term solution.

I had a Mitsubishi Galant which constantly gone low on oil, up to a point where I need to top up the oil EVERY WEEK.

Brought it back to Mitsubishi which investigate and found that the big end bearing seal is worn and the car is loosing oil because of that.

Long term solution you should aim to get the car to Nissan and ask them to fix it as they would fix a 350Z engine. at least with V35 the engines is something that Nissan mechanic has seen before in a local 350Z.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...