Jump to content
SAU Community

220kw R34 For Sale! (syd-wollongong)price Dorped!

YE99LO
 Share

Recommended Posts

YE99LO Explorer

YE99LO

Posted
Posted (edited)

Spend more than $10000 for modification, all brand new parts!!!

Well tuned by DART AUTOMOTIVE

45000KM'S(changes slowly)

220KW at Rear wheel!!

0-100 5.49 Seconds(will do better if got nice tyre)

Apexi power Fc ECU

Greddy boost controler (Low 0.8bar HI 1.0 bar)

Greddy ajustable cam gear

Gate heavy duty timing belt

Hks Racing suction air intake

Hks Hi Power cat back exhaust

Hks BOV

Sard 550cc injector

Nismo 300km 10000raps Dash

Nismo fuel regurator

Nismo fuel pump

pro cooling FMIC

18 inch alloy wheel

full Top secret body kit

as new paint

HID 6000k head lamp

just drive 5000kms after put on those parts!!

This car was bought from my jap friend, All this mods done in AUSSIE! Have the Log book for service in japan!!

was $28000 Now $26899!! still negotiable!

My email/msn:[email protected]

phone:0432674032

Michael

plante number: YE99LO

Vin:6u90000er34004741

Engin no:RB25285111A

Feel free to ask!!

3578529.jpg

3578581.jpg

3578598.jpg3578599.jpg3578586.jpg

3578626.jpg

Edited by YE99LO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Duncan
      NC MX5

      By Duncan · Posted

      Perfect day for a pie, really needs a soft top in this weather though
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Prime parking, she is a little girl...LOL
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...