Jump to content
SAU Community

Lots Of Rb26 And Rb25 Aftermarkets Parts! Trust Twin Pillar Mount, Jun Baffle, Gtr Injector Resistor Pack, Nismo Injectors


Recommended Posts

Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $650.00 $600.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed. (tomie baffle not included)

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $540.00 $500.00 $490.00 $480.00 FIRM delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: R33 Vspec twin turbo's,

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: selling as suit reco/ hi flow no line included just turbo's and stock manifolds.

Price: Lets say $400.00 $300.00? as I have no idea what they are worth.. any offers?

To Fit: (What car) Any GTR/ hybrid twin turbo

Location: Sydney

Contact: PM me or reply here

Comments: Selling as suit hiflow or reco. Little shaft play in one, other has siezed. These are steel wheel units.

They came with an engine im rebuilding, replaced them with 6boost manifold and GT2530's. They will suit someone looking to hiflow turbos while keeping there car on the road as long as possible.

Item: R33 Vspec AFM's

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: Great condition

Price: $200 for the pair or $120 each $150 for the pair!

To Fit: (What car) Any GTR

Location: Sydney

Contact: PM me or reply here

Comments: bought Z32's so these are no use to me..

New addition 30/4

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered FIRM

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

New addition 5/5

Item: Gtst Series two headlights

Age: unknown at least 10 years

Condition: used, top lugs have been damaged, otherwise in good nick

Price: $650.00 (these are $500 each from wreckers!)

To Fit: (What car) R33 gtst skylines

Location: Sydney

Contact: PM me or reply here

Comments: Getting a pair of Xeon's instead..

New addition 6/5

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $550.00 ono

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

New addition 6/5

Item: Genuine R33 gtst s1 rear wing, painted white with brake light

Age: used

Condition: used

Price: $50.00

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it,

New addition 7/5

Item: Genuine R33 gtst s1 passangers seat

Age: used

Condition: used but in great nick

Price: $50 $40.00

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it,

New addition 15/5

Item: RB26 stock pistons and rods (05U)

Age: used

Condition: used out of a 80,000km engine

Price: $300.00 ?

To Fit: (What car) Rb26 or make a RB24

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, going forged

New addition 15/5

Item: A31 (Cefiro) engine cross member

Age: used

Condition: straight no rust

Price: $200.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, was going to do a 26/30 but decided against it. so this is no longer needed.

New addition 16/5

Item: Brand new Greddy catch can with all fittings

Age: Brand new

Condition: new

Price: $80.00 SOLD PENDING PAYMENT

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, got a combination tank.

New addition 17/5

Item: Q45 afm with plug

Age: used

Condition: used

Price: $180.00

To Fit: (What car) anything you want

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it, using twin turbos 2 x z32's

post-10595-1124285027.jpg

All the below items is red are SOLD

Item: Gates racing timing belt to suit RB26. part #T1040R.

Age: New in packet

Condition: Brand new

Price: $80.00 SOLD!

To Fit: (What car) RB26

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it,

Item: Bee R rev limiter

Age:

Condition: used,

Price: SOLD

To Fit: (What car) anthing you want

Location: Sydney

Contact: PM me or reply here

Comments: was an impulse buy and I need money for my rebuild!

Item: Defi Link gauges and controller (6 in total)

Age: used

Condition: used

Price: SOLD

To Fit: (What car) anything really.

Location: Sydney

Contact: PM me or reply here

Comments: going haltech/laptop set up so dont need gauge holders or gauges!

They are the defi link (white face) from memory there are:

1x 2.0 bar boost Gauge

1x fuel pressure Gauge

1x RPM Gauge with a Shift light.

1x water temp

1x oil temp

1x exhaust temp

2x Defi-Link Control Unit II

3 x mounts to mount in dash board

All sensors and wiring required

New addition 6/5

Item: R33 GTR Vspec gearbox and transfer case

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: used, but in good health.

Price: $650 pick up or buyer can arrange frieght. Sold

To Fit: (What car) GTR or gtst if you want to modify the transfer case

Location: Sydney

Contact: PM me or reply here

Comments: Bought it as a motor box package but do not need it.

New addition 6/5

Item: Trust twin Guage pillar mount

Age: Brand new

Condition: new.

Price: $100.00 SOLD

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: going haltech/laptop set up so dont need gauge holders or gauges!

Cheers,

Johno

Edited by J'z-R33

Pics are up, also forgot to mension, the sump has a dash 8 female adaptor for oil return line from the head..

I'll clean the sump up and take better pics on Saturday 10/5..

Defi's are sold pending payment on saturday 10/5, if the buyer falls thru there are 3 others who got in after that..

G'day Johno,

Do you still have your Nismo injectors? If so, please let me know. I'm in Perth but only for a few more days. Much appreciated dude.

Regards,

Joel

any photos? and they are for an RB26? Cheers

Hey all,

Got the below items for sale as they are no use to me anymore..

Item: Nismo 600cc top fed injectors

Age: not sure, injectors were flow tested and cleaned before purchase

Condition: good, flow tested and cleaned before purchase

Price: $650.00 $600.00 delivered

To Fit: (What car) top fed RB26

Location: Sydney

Contact: PM me

Comments: Will up some pics up tomorrow. they are the purple ones

The 600cc injectors wont cut it for my application so they have to go..

Item: RWD RB26 sump, has diff cut off and drive shaft welded up also have a #8 oil return feed.

Age: New (was only dummy fitted)

Condition: as above

Price: $550.00

To Fit: (What car) Suit RWD RB26 project

Location: Sydney

Contact: PM me

Comments: Had this sump modified by Jays Racing, its a standard alloy rb26 sump with the diff cut out and drive shaft welded up. It top quality work and took over 8 hours to create. I will post pics up soon and you will see the quality work! Its all Alloy construction and looks better then a factory sump!

Item: JUN Oil Pan Baffle Plate for RB26dett

Age: Brand new

Condition: Brand new

Price: $540.00 $500.00 $490.00 delivered anywhere is Oz.

To Fit: (What car) RB26dett

Location: Sydney

Contact: PM me

Comments: Helps with oil control to the oil pickup

This is the best aftermarket baffle on the market, its brand new in the box bought for $540. Part number 1028M-N001

Item: R33 Vspec twin turbo's,

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: selling as suit reco/ hi flow no line included just turbo's and stock manifolds.

Price: Lets say $400.00 $300.00? as I have no idea what they are worth.. any offers?

To Fit: (What car) Any GTR/ hybrid twin turbo

Location: Sydney

Contact: PM me or reply here

Comments: Selling as suit hiflow or reco. Little shaft play in one, other has siezed. These are steel wheel units.

They came with an engine im rebuilding, replaced them with 6boost manifold and GT2530's. They will suit someone looking to hiflow turbos while keeping there car on the road as long as possible.

Item: R33 Vspec AFM's

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: Great condition

Price: $200 for the pair or $120 each

To Fit: (What car) Any GTR

Location: Sydney

Contact: PM me or reply here

Comments: bought Z32's so these are no use to me..

New addition 30/4

Item: GTR resistor pack

Age: Brand new

Condition: Brand new

Price: $140.00 delivered

To Fit: (What car) anything running low imp. injectors

Location: Sydney

Contact: PM me or reply here

Comments: bought two by mistake, also have OEM RB26 injectors and rail..

New addition 5/5

Item: Gtst Series two headlights

Age: unknown at least 10 years

Condition: used, top lugs have been damaged, otherwise in good nick

Price: $650.00 (these are $500 each from wreckers!)

To Fit: (What car) R33 gtst skylines

Location: Sydney

Contact: PM me or reply here

Comments: Getting a pair of Xeon's instead..

Item: Bee R rev limiter

Age:

Condition: used,

Price: $230 delivered

To Fit: (What car) anthing you want

Location: Sydney

Contact: PM me or reply here

Comments: was an impulse buy and I need money for my rebuild!

New addition 6/5

Item: R33 GTR Vspec gearbox and transfer case

Age: out of a 1997 if i remember correctly.. had 80k on the clock.

Condition: used, but in good health.

Price: $650 pick up or buyer can arrange frieght.

To Fit: (What car) GTR or gtst if you want to modify the transfer case

Location: Sydney

Contact: PM me or reply here

Comments: Bought it as a motor box package but do not need it.

New addition 6/5

Item: Trust twin Guage pillar mount

Age: Brand new

Condition: new.

Price: $100.00

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: going haltech/laptop set up so dont need gauge holders or gauges!

New addition 6/5

Item: Defi Link gauges and controller (6 in total)

Age: used

Condition: used

Price: SOLD PENDING PAYMENT

To Fit: (What car) anything really.

Location: Sydney

Contact: PM me or reply here

Comments: going haltech/laptop set up so dont need gauge holders or gauges!

They are the defi link (white face) from memory there are:

1x 2.0 bar boost Gauge

1x fuel pressure Gauge

1x RPM Gauge with a Shift light.

1x water temp

1x oil temp

1x exhaust temp

2x Defi-Link Control Unit II

3 x mounts to mount in dash board

All sensors and wiring required

New addition 6/5

Item: Genuine R33 Gtr rear wing, painted mid night purple (was on a 40th ann. shell I purchased recently)

Age: used

Condition: used

Price: $600.00 neg

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Bought a do luck rear wing so not needed.

New addition 6/5

Item: Genuine R33 gtst s1 rear wing, painted white with brake light

Age: used

Condition: used

Price: $50.00

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it,

New addition 7/5

Item: Genuine R33 gtst s1 passangers seat

Age: used

Condition: used but in great nick

Price: $50.00

To Fit: (What car) R33 gtst

Location: Sydney

Contact: PM me or reply here

Comments: Dont need it,

Cheers,

Johno

G'day Johno,

Do you still have your Nismo injectors? If so, please let me know. I'm in Perth but only for a few more days. Much appreciated dude.

Regards,

Joel

any photos? and they are for an RB26? Cheers

Hey Joel,

Still got them mate, Injectors are top fed RB26. also sent you a pm.

Cheers

Johno

Woops, I didnt update it once I took the pics.. Thought I had an exhaust temp one too.

The defi's are sold pending payment tomorrow.

Hey mate,

Feedback left, and I've pm'd you the bee*r instructions..

Will post the Trust gauge holder pics in a minute.

Cheers

Johno

hey mate very interested in the catch can cross member and rwd sump could you give me a price for postage to gold coast

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...