Jump to content
SAU Community

R34 Gtr Front Coilovers

black_gtst
 Share

Recommended Posts

black_gtst Proficient

black_gtst

Posted
  • Author
Posted

ones im lookin at gettin are adjustable ride height, pre load and 5 stage damper settings. will they be ok in my car? only do track days every now and then and i have nismo coil overs in back? wat think?

brett

Sydneykid Grand Master

Sydneykid

Posted
Posted

Being 4wd, the GTR's have around 180 kgs more weight in the front, so the chances of the spring rate being too high for a 2WD are pretty much guaranted. Plus Cusco coil overs are well known for having higher than ideal spring rates even in the car they are designed for. So the chances of the spring rates being too high are now doubled.

The only way to be sure is to confirm the spring rates with the guys selling them. If he doesn't know, this thread tells you how to measure them and I can then work out the spring rates for you.

http://www.skylinesaustralia.com/forums/in...showtopic=79157

If the spring rates are too high then the shock rates will similarly be too high. In typical Cusco fashion, the adjustment on the shocks will most likely only do rebound (extension) and will have no effect on the bump (compression), so softening the shocks will achieve very little in improving the handling and/or ride comfort.

Cheers

Gary

Sydneykid Grand Master

Sydneykid

Posted
Posted
spring rates for the front on the cuscos is 12k. way too firm for a 33 gtst or will they be ok?

thanks for the help!

brett

Too firm for the track, way too firm, that's almost double what R type tyres will tolerate. In fact it's more than we run on the race cars with full slicks.

Cheers

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...