Jump to content
SAU Community

Recommended Posts

+1 :) even though mine isn't the cheapest of cheapest RB30 builds it's far from expensive.

I'm aiming for 400rwhp when the GT35R goes on, I think this is going to be the upper end of the drivability limits of my rwd 32 platform and with my setup I'm probably going to be struggling to keep it down that low for now! There is still headroom for a bit more power too ;)

Personally I wouldn't waste money on the RB20 but, of course, I'm biased. The monster torque of the 30 makes for a very nice allround car, I mean I was following Tristan through the twisties on Friday in 4th gear up those hills.. the ol' RB20 wouldn't have liked that much..

+1 i am doing the same thing and building an rb35/30 its fairly cheap to get an rb25 and an rb30 block is even cheaper but remember if you want a reliable engine you are going to have to spend a fair bit of money have you taken everything into account that you will also need to buy?

I think iv made my decision..... i think ill be going for the 25

i think the cost of a 25 could be a little better and it also means ill have more cash to add my big turbo n clutch and so forth ;)

I cant wait.... now ill be in the hunt for 25 half cut so if anyones knows of the ideal place/person to get a well looked after 25 then this would be greatly appreciated. otherwise ill find one :happy:

Personally I wouldn't waste money on the RB20 but, of course, I'm biased. The monster torque of the 30 makes for a very nice allround car, I mean I was following Tristan through the twisties on Friday in 4th gear up those hills.. the ol' RB20 wouldn't have liked that much..

Man the 25Neo didn't even like it...

I mean it 'managed' in 4th, but def wanted some more down low balls.... Sometimes, knocking it back to 3rd was required to keep up with the cars ahead...

btw, I think go either a 25 or 25/30 combo engine... Make sure you get a NEO so you've got solid lifters and NVCT on both the intake and exhaust...

Edited by Marco-R34GTT
Man the 25Neo didn't even like it...

I mean it 'managed' in 4th, but def wanted some more down low balls.... Sometimes, knocking it back to 3rd was required to keep up with the cars ahead...

btw, I think go either a 25 or 25/30 combo engine... Make sure you get a NEO so you've got solid lifters and NVCT on both the intake and exhaust...

yeh i thought about a NEO... will that go in with no hassle like the 33 rb25 or they basically the same.... i wouldnt mind a neo because its a newer engine

Too many hassles :nyaanyaa:

BTW my drivability through the hills the other night will disappear when the big turbo goes on.. because power is so early and delivered so linearly is great but once new turbo is on I'll only be able to floor it on the straight bits :(

Umm.. even then I wouldn't be able to floor it until the straight bits.. VH41 + TT would just send me into a tree faster :nyaanyaa:

To be honest though, with the 3L + GT35R I should have decent low down with absolutely insanity over 3000rpm :(

if you want a 26 your better selling up and buying a gtr but if you'd like to go down the path of a 26 in yours with rwd setup easiest option is to buy a half cut as you'll have everything in there like all the hoses front brakes wiring resistor packs front mount intercooler+piping and yeh

same with the 25 get a half cut all is there like brakes, wiring and hoses and shit

cheers

andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...