Jump to content
SAU Community

Recommended Posts

Hi, ive just recently put my subs back in my skyline after having them out for about 4 months. I started pulling one box apart as im gonna make new ones, but thought i have no time to start it yet, so ive just put them back in for the time being.

The one i pulled apart (put back together) is working fine, the other, i just had sitting on the concrete in its box; starts popping when i put any decent bass behind it....is there something in the head unit i should be looking at or the amplifier, or is my sub stuffed....i didn't really want to replace it as they are both Alpine R (400 a piece), and like anything that comes in a pair if you replace one you should do the other aswell.

Does anyone repair, or are they a throw away item.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/217495-sub-popping/
Share on other sites

swap the non-popping with the popping and retest.

Could be amp chsnnel stuffed, causing pure voltage, could be voicecoil on sub stuffed, needing new/repaired sub.

unless it's a few grand sub, generally there isn't a worth of repairing them.

B.

Link to comment
https://www.sau.com.au/forums/topic/217495-sub-popping/#findComment-3841901
Share on other sites

Pulled out my boot this arve, as my battery went dead, when i had a look at the amplifier, one of the rca'shad fallen out. It has two going from the dvd box under my seat to the back then its got a splitter thing that changes it to four rca's one had fallen out so i guess that was the problem but i ran outta light b4 i could even get the battery in. Im hoping this was the problem...if it is fixed would it have caused much permanent damage? had it down low maybe for an hour.

Link to comment
https://www.sau.com.au/forums/topic/217495-sub-popping/#findComment-3844622
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...