Jump to content
SAU Community

Recommended Posts

hey,i have a 32 gtst with an rb25, every time i slow down from boost i get white smoke that puffs out from the exhaust (fair bit)

none on idle or anything only slowing down. from what i know its probly a blown oil seal on the turbo... correct? if so whats a rough price for new seals with labour?

engine specs: standard rb25 turbo running 10 psi, 3 inch no cat, microtec, ebc, 040 fuely etc

also i have a brand new garrett t04 sitting around, would it be better to fit this? i have boch 040 fuel pump but standurd injectors, once again would like a rough price from ur experiance.

sorry to ramble on...

cheers dylan

Link to comment
https://www.sau.com.au/forums/topic/217573-turbo-problem-and-question/
Share on other sites

Don't discount valve stem seals. You need to perform tests to determine which is the cause of your problem.

Remove the turbo and manifold and do a vacuum test on the exhaust ports to determine the condition of the valve stem seals. If they come up ok, then you need to examine the turbo.

I'm not about to go into depth into how you should do this as you won't even have the tools or equipment to test the valve stem seals anyway.

Good luck

sorry mate, it's a harsh reality. Valve stem seals are more likely to leak at negative cylinder pressure as the vacuum effect draws oil through the stem seals. They can weap at idle also but it slowly gets burnt away and not so noticable. On decel, the cylinder draws oil past the stem seal and because you have no real combustion until you resume accel, it will become quite noticeable at this point.

Could still be your turbo but would hate to see you replace it and have the same problem without checking it properly first.

3lit3 is correct, but decel will vacuum suck oil in from a few places, even up past the oil control rings in the bore [although rings usually also smoke after an idle period then accel].

I think you need to determine if the white smoke is oil or water/coolant as well, this could help you determine where to look.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...