Jump to content
SAU Community

Recommended Posts

hey i got a r32 with rb25det in it (previously had 20det)

was just wondering if any one knew if i have to take it over the pits to get it properly rego'd.

or can i just get one of those change of vehical details forms ?

its been professionaly converted with recipts

also if i do have to go to the pits will the rest of the car have to be roadworthy? or just the engine

cheers dylan

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/
Share on other sites

I thought that if it is anything other than a factory upgrade then it had to go over the pits. (rb25de from gts-x in a r32)

This is how i read the papers but if im wrong please correct me as ill be doing a simillar thing.

Cheers

Ross

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3861782
Share on other sites

I got a yellow sticker (kind of unrelated..) just after I put the 30 in, went of the pits, they checked engine number, notarised it, and I was on my way with a legal RB30 under the bonnet :P

As long as you don't have a bigass highmount turbo there should be no dramas and I'm pretty sure RB25 falls inside the capacity increasement zone.. with my 50% increase I was afraid they were going to make me get engineering certificates.

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3861790
Share on other sites

cheaper to engineer all at once though

Point being for certain engine upgrades you won't need engineering.

My RB30, even though it's a full litre increase (50%) they didn't deem to need engineering. Most likely because it looked factory and with only an RB25 turbo on there it wasn't insane, similar to stock response but just with a shitload of nuts down low.

I believe in taking things in steps instead of rocking up to the pits with a 50% larger engine with a 600hp turbo hanging off the side and then hoping it's going to get engineered and passed. I have the engine installed and licensed, when I go to get it legal after the GT35R goes on then the whole 50% more capacity is a problem I won't have to deal with.

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3864802
Share on other sites

i went from a 3L NA to 3L turbo (2j)

they didnt pay any attention to the high mount and just took the engine number and engineering cert

i know yours is a 50% increase but as long as they sign it off

i dont think it matters much which way goes first

other thing is, if you want to save money

pass with the rb25 or 30

then legalise it when u get a yellow? (if ever)

Edited by R32 Driver
Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3872972
Share on other sites

I was planning on doing it all properly but got a sticker like 3 days after the 30 went in so I just had to hope that when I went over the pits they didn't decide to have a baby cow over it :)

Steve, did you get your tailshaft made at Final Drive? when I got mine done, Phil was telling me how he had recently made one for a guy that put a 2jz in his 32..

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3876822
Share on other sites

Hah yeah, plenty of cars kicking about with that sort of power and a few coming out with a LOT more..

I almost feel like I'm being a pussy shooting for 400rwhp to start with :) but really, that should be plenty in a rwd 32 platform!

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3879502
Share on other sites

You WILL NEED AN ENGINEERS CERT!! the mark up is not 25%. I am current running around with a rb25 that isnt yet ticked off with vic roads as they wont allow it without a cert. I have been to vicroads over 5 times, each time with more evidence that the r32 came out with a rb25. Last 2 times i went they even cought up on it being a rb25de that came with the r32.

vicroads people also wont care less if its got a high mount turbo as big as the engine or a stock turbo, thats not why that knock you back. The last chick who looked for the engine number wouldnt have known what a turbo was. i have a high mount and that hasnt been the problem. So far, everytime i have gone, they have somehow noticed the engine size step up when typing on their computers so a message must come up saying it needs an engineers cert.

sorry to put a down on your plans but seriously, its not easy getting it passed. im ganna try a few more times at a different vicroads in the hope someone just doesnt pick up on it. Might be easier for you being in W.A but in victoria, it seems im ganna have to fork out like 4G to get this all cleared over :D

Edited by 7k R32 PLEASE!
Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3881787
Share on other sites

You WILL NEED AN ENGINEERS CERT!! the mark up is not 25%. I am current running around with a rb25 that isnt yet ticked off with vic roads as they wont allow it without a cert. I have been to vicroads over 5 times, each time with more evidence that the r32 came out with a rb25. Last 2 times i went they even cought up on it being a rb25de that came with the r32.

vicroads people also wont care less if its got a high mount turbo as big as the engine or a stock turbo, thats not why that knock you back. The last chick who looked for the engine number wouldnt have known what a turbo was. i have a high mount and that hasnt been the problem. So far, everytime i have gone, they have somehow noticed the engine size step up when typing on their computers so a message must come up saying it needs an engineers cert.

sorry to put a down on your plans but seriously, its not easy getting it passed. im ganna try a few more times at a different vicroads in the hope someone just doesnt pick up on it. Might be easier for you being in W.A but in victoria, it seems im ganna have to fork out like 4G to get this all cleared over :geek:

Different state mate, shit works differently here.

Afterall, my car is licensed with a twincam 30 :D

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3882713
Share on other sites

Yes mate different state.....

Bubbas living proof that he doesnt need it

kermits ceffy also has a rb25 which originally was a rb20 (also in WA)

i went from NA to Turbo and strapped on a high mount

engineer cert would cost 500$ give or take a hundred depending on what you want engineered

emissions testing, db test, brake test would all be under $500

WA has it good? lol

Link to comment
https://www.sau.com.au/forums/topic/218847-rb25-in-my-32/#findComment-3882965
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...