Jump to content
SAU Community

Recommended Posts

What was the MPH for RH9?

The first run I saw was [email protected] off the line then planted it but not a clean run. I agree - radials on first meet, would have been better.

they ran a 10.6 @ 146 to finish up. shows the car will do a 9 with a better driver and set up.

i just would have liked to have seen it run on radials. I even offered them the use of our tyres and rims.

Mark's car is definitely a machine! Would have been great to see it run a 7...

Was a good day, just a pity that it dragged out for so long before the eliminations started, and then ultimately, it got cancelled.

Oh dam was waiting for RH9 to come out :)

Wonder why Croydon hasnt prettied up Devilish...

Mark's car was awesome, did the best burnouts..I didn't see twoggle? :)

from the other thread...

News on our car...

Got diff in and running friday....put Autronic in and had a few problems getting it running. Finally got it sorted late Saturday afternoon and tuned. The ATTESSA ecu was not recieving the correct signals from the Autronic to run the 4WD. We tried bridging over a TPS signal and lost the bloody tune!! The Autronic went bonkers and took an hour to recover it. Mark retuned the car in about an hour and by midnight had it running and making good power. We again got out the wiring diagrams and found that the earlier bridge we ran was on the wrong pin...bugger. Got the TPS signal to the ATTESSA and the 4WD came alive. However the output was making the TPS ecu input unstable and we decided at 2.30am to pack it up and concentrate our efforts on Marks car. Deciding that running the car while not 100% was not worth risking the chance of damaging it...so yes with only a few hours sleep that night we rocked up and set a new Aussie GTR record.

they ran a 10.6 @ 146 to finish up. shows the car will do a 9 with a better driver and set up.

i just would have liked to have seen it run on radials. I even offered them the use of our tyres and rims.

Hey i thought it was only @137mph

But not 100%.



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...