Jump to content
SAU Community

Recommended Posts

Make:gtr

Model:32 1989

Milage:120000

Transmission:manual

Colour:black

hks hiper d suspension

-pivot speed limit remover

-gaitmaier wheels front 18s 10"wide rear 18s with 12" wide

-Cd player

-6/9 front and rear speakers

-hicas lock bar

-clear custom front headlights and indicators

-most of the rear bushes replaced

-button clutch

-3.5" full exhaust

-nismo 260km dash

-engine is perfect condition with 180 psi across a 6 cylinders,

-car made 230 kw on 14.7 psi and has ran 12.5

catherine on 0449172714 Willing to swap for 180sx with cash on top melbourne

engine is a 93 model on a healthy 180psi across all cyclinders, the reason its so cheap is the dik who painted the car got over spray on the door trims, also there is a few small interior parts missing.

although the exterior paint is mint, the car needs bout 1k spent on it to make it in tip top condition

post-16324-1211438850_thumb.jpg

post-16324-1211439405_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/220406-gtr-32-wide-body/
Share on other sites

  • 2 weeks later...

just so you know, this car is got very bad compression rangeing from 145-100psi. It has a very bad misfire, needs new coil packs, turbo gaskets leaking, paint drips down doors, crakcs in body kit, between seal of boot and rear 1/4 panel is cracked, missing window seals, hole in carpet etc... Just pointing out some things that u will not see if u buy over internet. Sorry Ali but they have a right to know.

just to let you no the compression test was done incorrectly, that low cylinder went up 5 psi every time you did the test, throttle is supposed to be held flat to the floor,

and its getting tested to day, misfire is fixed gaskets are replaced, yet it got tested a couple on months ago and pssed with flying colours

Yes the public needs to know. Saw this car a while ago, has had new rad support and bumper reinforcement fitted. car doesn't run 4wd properly and there is afm issues. not trying to wreck your sale, it's a good price.

Don't no why they cut the rear quarters to fit widebody though, may need to be re-engineered if defected etc.

That was a while ago when the car was having 4wd problems and like every turbo car there are problems that occur then you fix them Im sure everyone on this site has had a problem with their car cars do not run prefect 24/7 unless they are new.

The car is running fine now my mechanic has fixed all the problems with it

For someone to buy car without even getting it check before head is just stupid so if people want to listen to other memebers on this about how they think my car is running well good for you because the mechanic will say different.

maybe they are just points people can check. i wouldn't be defensive about those points if they are fixed, just show people each aspect that has been brought up and show them how it is now better.

i would be interested if you are interested in trades plus cash your way...

i would definately be doing a compression test myself though as well as checking each and every point that has been raised in this thread.

msg me if you are interested in trades. :-)

Yes the public needs to know. Saw this car a while ago, has had new rad support and bumper reinforcement fitted. car doesn't run 4wd properly and there is afm issues. not trying to wreck your sale, it's a good price.

Don't no why they cut the rear quarters to fit widebody though, may need to be re-engineered if defected etc.

the car has never had a new radiator support fitted and the afms have been replaced also 4wd wasnt working due to different sized tyres

aslo you try fitting 12" wide wheels on your car without cutting the guards, ofcourse you could but you would shread your tyres in 2 secs flat

they got cut folded back and welded

Edited by ali-turko

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...