Jump to content
SAU Community

R32 Gts/gtr Dash Mat

dmr

By dmr,
in Exterior & Interior Styling

 Share

Recommended Posts

infamous_t Veteran

infamous_t

Posted
Posted

Ordered mine today, gonna cost me closer to $60, apparently prices have gone up recently... and there is delivery :kiss:

btw, it looks like you can order direct from them on there website, not sure if its cheaper, but might be easier for those that aren't near a Repco http://www.protectomat.com.au/main.html

tin-pain Rising Star

tin-pain

Posted
Posted

in the title of your thread you said "SICK OF REPAIRING THE BUBBLES IN YOUR DASH"

So have your repaired these bubbles before and if so how is it done....??

because if it is possible i would like to repair the bubbles first and then get the mat to protect it.

adam-__- Grand Master

adam-__-

Posted
Posted
in the title of your thread you said "SICK OF REPAIRING THE BUBBLES IN YOUR DASH"

So have your repaired these bubbles before and if so how is it done....??

because if it is possible i would like to repair the bubbles first and then get the mat to protect it.

If we're talking about the same bubble (one circled in attached photo), I've heard that a heat gun and a piece of wood will get it down. Just heat up the affected area and push down with the piece of wood. I haven't tried it myself, but it could work.

post-32186-1212831056_thumb.jpg

infamous_t Veteran

infamous_t

Posted
Posted
had a look on the protectomat website but couldn't see it..? maybe i looked in the wrong spot though?

Nah not listed for reason explained in the beginning of the thread, however you can manually add the part number for your order, which is mentioned on the first page of the thread. Or just email them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...