Jump to content
SAU Community

Recommended Posts

hi guys,

i notice that washing off the exhaust fumes around the rear bumper/tail section is hard to come off & normal car wash dont take it off!

what should i use...i know that car polish works but its a pain in the butt, so does kerosene but i dont think its good for the paint - i want something that doesnt damage the paint work.

regards,

Maquires Paint cleaner

Maquires Tech wax

Use in that order, perhaps use the paint cleaner twice it removes surface contaminates such as oil, tar blah blah blah. its very good at cleaning headlight lens too.

the wax will put a clear coat of protectant on the bumper to prevent oil and so on sticking to it.. this should be reapplied after 24 hours to provide maximum protection.

Once this is done the fumes will come off 90% under water 10% may require a scrub. The wax will need to be reapplied at least every 1 month, I do so every two weeks.

I've seen carbon style stickers that people have put on around the exhaust area to stop it getting on the car has a silver edge aswell, looked quite nice. no idea where they got them from

geez the brownish haze I get above the exhaust comes off with soapy water and a sponge..

you must have some sort of super staining fumes there...?

im surprised u can wash the fumes off with just soap - what soap & sponge do you use? maybe this armour all car wash i use is crap...the sponge i have is the normal beige sponge stuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...