Jump to content
SAU Community

Recommended Posts

Hey, just chucking this in here as i know he frequents this section and i guess its related to suspension. I was reading his profile and noticed some other people are having issues with him replying to PM's, now im not sure if theres an issue with his messenger or he's too busy to be reading through PM's ATM (which is fair enough), but i ordered some suspension off his son Matt using Gary's account about 1 and a half months and really need to know the status of it all as i know there have been delays etc. but im just missing too much track time ATM and really want them ASAP. I understand this isn't Gary's transaction so i would prefer to talk with Matt directly, so if either u could reply to this Gary/Matt or could someone chuck me a contact number i can reach them on, i beleive i have Gary's somewhere but dont really want to be troubling him when its Matt i need to talk to. The PM system is just way too slow and frustrating.

cheers,

Stewart

Link to comment
https://www.sau.com.au/forums/topic/222406-sydneykid/
Share on other sites

Sorry, the inbox is full again, makes 5 days in a row, we received 42 PM'S yesterday and we answer every one of them in the order that we receive them. So if you have sent one please be patient, we will get to it.

From memory you were after a coil over conversion for the Bilsteins that you already have, correct me if I'm wrong. If that's the case, then the bad news is Eibach (Australia) did't have the springs in stock and they had to come from Germany. The good news is they have been promised for this week. So Matt will get back to you as soon as this is confirmed.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/222406-sydneykid/#findComment-3919451
Share on other sites

Sorry, the inbox is full again, makes 5 days in a row, we received 42 PM'S yesterday and we answer every one of them in the order that we receive them. So if you have sent one please be patient, we will get to it.

From memory you were after a coil over conversion for the Bilsteins that you already have, correct me if I'm wrong. If that's the case, then the bad news is Eibach (Australia) did't have the springs in stock and they had to come from Germany. The good news is they have been promised for this week. So Matt will get back to you as soon as this is confirmed.

Cheers

Gary

Thanks mate, yep thats me, as i said the PM system is just way too slow, especially with the amount you receive. When i sent the messages it didnt come up and tell me that ur inbox is full so thats probably where the issue is as it used to tell u when the recipient's inbox was full. The first one i didnt get a reply to was sent was back on the 23rd, hence why i thought there might have been an issue.

I've just got the contact details for the workshop where Matt works so ill give him a call and discuss it with him, as i need to talk to him about a few other things as well.

While i'm at it, will the 6kg spring be fine to run on the front standard bilstein until i am able to get i revalved to the higher spring rate? roughly what will it cost to get the 2 fronts revalved?

Link to comment
https://www.sau.com.au/forums/topic/222406-sydneykid/#findComment-3919978
Share on other sites

Thanks mate, yep thats me, as i said the PM system is just way too slow, especially with the amount you receive. When i sent the messages it didnt come up and tell me that ur inbox is full so thats probably where the issue is as it used to tell u when the recipient's inbox was full. The first one i didnt get a reply to was sent was back on the 23rd, hence why i thought there might have been an issue.

I've just got the contact details for the workshop where Matt works so ill give him a call and discuss it with him, as i need to talk to him about a few other things as well.

While i'm at it, will the 6kg spring be fine to run on the front standard bilstein until i am able to get i revalved to the higher spring rate? roughly what will it cost to get the 2 fronts revalved?

They'll be OK, not perfecrt obviously but OK for now.

I prefer not to discuss prices on the forum, some people get upset. Budget for around half what the Bilsteins cost and you should get a pleasant surprise.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/222406-sydneykid/#findComment-3920056
Share on other sites

They'll be OK, not perfecrt obviously but OK for now.

I prefer not to discuss prices on the forum, some people get upset. Budget for around half what the Bilsteins cost and you should get a pleasant surprise.

Cheers

Gary

ahk, fair enough, thanks. I'll give u guys a call tomorrow at Superior and have a chat with Matt about going 6/4 instead of 5/4.

Link to comment
https://www.sau.com.au/forums/topic/222406-sydneykid/#findComment-3920886
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...