Jump to content
SAU Community

[vic] Gtr Bar, Waterspray Controller, Blitz Bov, Airbrush, Compressor

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

OK. i am clearing out a lot of stuff I no longer need. here goes

Airbrush and compressor.

this thing is excellent for touch ups and any fine work you need. they have only been used twice to do some touchups. you can get a really professional job. the airbrush is a really good quality one and is not dodgy spec. same compressor selling on ebay for $179. the brush cost $56

gallery_12633_2626_45072.jpg

gallery_12633_2626_326237.jpg

selling together with hose for $100

Guard roller. this is an excellent tool and is worth it weight in gold :cheers: I have done what i need with it and no longer need it. this is probably the best one on the market. I work for a car company and got it thru work for $194 trade price.

gallery_12633_2626_4638.jpg

Selling for $100

GTR front bar. R32 black. its missing the lower lip. its fiberglass - drift spec or fix. $50

gallery_12633_2626_65761.jpg

BLITZ BOV super sound attached to R32 pipe. will bolt straight on. but I will need your stock pipe as part of the deal. (exchange) it looks almost exactly like the one in the picture. I can install it for you if needed. $100

gallery_12633_2626_3792.jpg

waterspray controller minus the thermistors. instructions can be got from mearcat and possibly the sensors too :( $40

gallery_12633_2626_40824.jpg

R33 - vct solenoid works fine $30

gallery_12633_2626_52082.jpg

R33 - ignitor works fine $75

gallery_12633_2626_118030.jpg

R33 - CAS works fine $75

gallery_12633_2626_59170.jpg

all parts located in melbourne :(

XRATED Veteran

XRATED

Posted
Posted (edited)

If you can find out what shipping will be to Hobart, I'll take the guard roller and the compressor off your hands.

PM me back

Cheers

Justin

Edited by XRATED

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...